Valid

GB/T 24804-2023Rules for the improvement of safety of existing lifts (English PDF)

提高在用电梯安全性的规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (27 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24804-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2023

Implementation date

September 7, 2023

Scope

GB/T 24804-2023 is the English-translated version of 提高在用电梯安全性的规范.

GB/T 24804-2023 is the Chinese standard "Rules for the improvement of safety of existing lifts". Its scope clause reads: This document specifies methods to improve the safety of elevators in use.

The goal is to apply current safety technology to make elevators in use meet the safety standards of newly installed elevators. The same level of safety as the ladder.

Note. Due to building design conditions and other reasons, it may be difficult to fully achieve the current level of safety. This document applies to permanently installed traction, forced and hydraulically driven passenger or freight elevators.

This document improves the safety of elevators in use for the following people. a) Passengers; b) Maintenance and inspection personnel; c) People around the hoistway, machine space and pulley room who may be affected by the elevator; d) Any other authorized person.

This document does not apply to the following situations, but can be used as a reference. a) Elevators with drive methods other than those specified in GB/T 7588.1-2020; b) Lifting equipment, such as chain bucket elevators, mining elevators, stage lifting equipment, machinery with automatic cages and hoppers, construction Lifts, marine lifts, offshore mining or drilling platforms, construction and maintenance machinery, or elevators in wind power towers; c) Elevators with an inclination angle between the guide rail and the plumb line greater than 15°; d) Elevators (lifting platforms) with a rated speed less than or equal to 0.15m/s; e) Safety of operation during transportation, installation, repair and disassembly of the elevator. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 24804-2023

National Standard of the People's Republic of China

ICS
91.140.90
Classification
Q 78
Replacing
GB/T 24804-2009

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative reference documents
  • 3 Terms and Definitions
  • 4 Major Hazard List
  • 4.1 Significant hazards involved
  • 4.2 Significant hazards not covered
  • 5 Measures to improve the safety of elevators in use
  • 5.1 General
  • 5.2 Hazardous state identification
  • 5.3 Hazardous state assessment
  • 5.4 Priority classification
  • 6 Verification of safety measures and/or protective devices
  • 7 Technical Documents
  • Appendix A (Normative) Safety Checklist for Elevators in Use

1 Scope

1.1

This document specifies methods to improve the safety of elevators in use. The goal is to apply current safety technology to make elevators in use meet the safety standards of newly installed elevators.

The same level of safety as the ladder.

Note. Due to building design conditions and other reasons, it may be difficult to fully achieve the current level of safety.

1.2

This document applies to permanently installed traction, forced and hydraulically driven passenger or freight elevators.

This document improves the safety of elevators in use for the following people.

a) Passengers;

b) Maintenance and inspection personnel;

c) People around the hoistway, machine space and pulley room who may be affected by the elevator;

d) Any other authorized person.

1.3

This document does not apply to the following situations, but can be used as a reference.

a) Elevators with drive methods other than those specified in GB/T 7588.1-2020;

b) Lifting equipment, such as chain bucket elevators, mining elevators, stage lifting equipment, machinery with automatic cages and hoppers, construction

Lifts, marine lifts, offshore mining or drilling platforms, construction and maintenance machinery, or elevators in wind power towers;

c) Elevators with an inclination angle between the guide rail and the plumb line greater than 15°;

d) Elevators (lifting platforms) with a rated speed less than or equal to 0.15m/s;

e) Safety of operation during transportation, installation, repair and disassembly of the elevator.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 7024 Terminology for elevators, escalators, and moving walkways

GB/T 7588.1-2020 Safety Specifications for Elevator Manufacturing and Installation Part 1.Passenger Elevators and Freight Elevators

GB/T 20900 Methods for risk assessment and reduction of elevators, escalators and moving walkways

GB/T 23821-2022 Mechanical safety safety distance to prevent upper and lower limbs from touching the danger zone

GB/T 24475 Elevator remote alarm system

GB/T 24477-2009 Additional requirements for elevators for people with disabilities

GB/T 24479-2023 Elevator characteristics in case of fire

GB/T 24480-2009 Elevator landing door fire resistance test leakage, heat insulation, radiation measurement method

GB/T 26465-2021 Safety Specifications for the Manufacturing and Installation of Firefighter Elevators

GB/T 28621-2023 Safety specifications for the manufacture and installation of new elevators installed in existing buildings

GB/T 31095-2014 Elevator requirements under earthquake conditions

EN81-82.2013 Safety regulations for the manufacture and installation of elevators in use Part 82.Improving the suitability of elevators in use for people with disabilities […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 24804

EditionTitleRevisionStatus
GB/T 24804-2023Rules for the improvement of safety of existing liftscurrent editionCurrent
GB/T 24804-2009Rules for the improvement of safety of existing liftsprevious editionSuperseded

This page sells the current edition, GB/T 24804-2023. Earlier editions are listed for reference only.

How to Download GB/T 24804-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
27 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24804-2023

$485.00