GB/T 24649.3-2009Air compressor of pneumatic braking system of tractor-trailers - Specifications (English PDF)

1 Scope

This section GB/T 24649 specifies the tractor trailer air brake system air compressor series of parameters, technical requirements, test methods,

Inspection rules, marking, packaging, transportation and storage.

This section applies to tractor trailer air brake system air compressor (hereinafter referred to as an air compressor).

2 Normative references

The following documents contain provisions which, through reference GB/T 24649 in this section constitute provisions of this section. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT)

GB/T 3853 displacement compressors acceptance test (GB/T 3853-1998, eqvISO 1217.1996)

GB 11122 diesel oil

GB 12691 air compressor oil (GB 12691-1990, neqDIN51506. 1985)

GB/T 13384 mechanical and electrical products packaging General technical conditions

JB/T 5673-1991 agricultural and forestry tractors and machinery paint general technical conditions

Parameter 3 Series

Tractor trailer air brake system air compressor series parameters should meet the requirements of Table 1.

Table 1

Bore/mm Stroke/mm nominal stroke volume/mL rated discharge pressure/kPa

4. Technical Requirements 4.1 air compressor manufacturer shall be prescribed by the program approved product drawings and technical documents.