GB/T 23359-2009Frame-type cabinets for low-voltage switchgear (English PDF)

1 Scope

This standard specifies the terms and definitions framework for low-voltage cabinet, model, normal use, installation, transportation and storage conditions, manufacturers mention

For information, general requirements, test methods, inspection rules, and packaging and storage.

Note. The so-called low-voltage cabinet frame refers to a typical metal profiles, for example, KB, KS, FA, KF and other profiles, to assemble manner (individual member may

One kind of welding cabinet) manufacture. It can be understood in a broad sense as a fully assembled low-voltage cabinet.

This standard applies to low-voltage cabinet frame (hereinafter referred to as the product).

This standard applies to products limited to.

--- Within the indoor installation;

--- Metal material made;

--- Internally mounted AC rated voltage not exceeding 1000V, no more often than not more than 1000Hz or 1500V dc electrical

Equipment and components.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 2423.5 Electrical and Electronic Products Environmental Testing Part II. Test methods - Test Ea and guidance. Shock (GB/T 2423.5-1995, idtIEC 60068-2-27. 1987)

GB/T 2423.8 Electrical and Electronic Products Environmental Testing Part II. Test methods - Test Ed. Free fall (GB/T 2423.8-

1995, idtIEC 60068-2-32.1990)

GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6.1995, IDT)

GB/T 2423.55 Environmental testing for electric and electronic products Part 2. Environmental Test Test Eh. Hammer tests (GB/T 2423.55-

2006, IEC 60068-2-75.1997, IDT)

GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT)

GB/T 8582 electrical and electronic equipment mechanical structure terminology

GB/T 22764.1-2008 Low Voltage cabinet - Part 1. Generic specification

GB/T 22764.2-2008 Low Voltage cabinet - Part 2. Dimensions Series

GB/T 22764.3-2008 Cabinet low pressure - Part 3. Environment and Climate

GB/T 22764.4-2008 and low voltage cabinet Part 4. Electrical safety requirements

GB/T 22764.5-2008 Low Voltage cabinet - Part 5. Basic test methods

IEC 62262.2002 Electrical equipment enclosure external mechanical impact protection class (IK code)

3 Terms and Definitions

Terms and definitions GB/T 8582 established in this standard applies.

4 Model

Product model name by the manufacturer, you can also use the basic equipment product model. Model by type code, design number, […]