GB/T 23174-2008Ventilating fans (English PDF)

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China National Light Industry Council.

1 Scope

This standard specifies the exhaust fan product classifications, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to single-phase rated voltage not exceeding 250V, other voltage not exceeding 480V, the AC motor drive for industrial use (Such as workshops, warehouses) mounted on the wall and under other similar environments for ventilation using axial flow fan.

This standard does not apply to household and similar purposes and other special conditions of use of the exhaust fan.

Safety requirements contained in this standard exhaust fan should meet the criteria in Table 6, Table 7 of the relevant provisions.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent All amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement Research on whether to use the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780:1997, MOD)

GB 1002 Household and similar single-phase plugs and sockets, type, basic parameters and dimensions

GB 1003 Household and similar three-phase plug and socket, type, basic parameters and dimensions

GB/T 1236-2000 Industrial fans using standardized airways performance test (idt ISO 5801:1997)

GB 2099.1-2008 plug socket for household and similar purposes - Part 1: General requirements (IEC 60884-1:1994, IDT)

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2: Test methods - Test Cab. Damp heat test (IEC 60068-2-78:2001, IDT)

GB/T 2423.17-2008 electric and electronic products environmental testing procedures Test Ka. Salt mist (IEC 60068-2-11. 1981, IDT)

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1: Press to accept the quality limit (AQL) retrieval batch test sample Programme (ISO 2895-1:1999, IDT)

GB/T 2829-2002 periodic inspection Sampling procedures and tables (for inspection of process stability)

GB 2900.29-2008 Electrotechnical terminology - Household and similar electrical appliances

GB/T 3667.1-2005 AC motor capacitors - Part 1: General --- Performance, testing and rating Safety requirements --- --- Install and run seeking guidance (IEC 60252-1:2001, IDT)

GB 4208-2008 housing protection (IP code) (IEC 60529:2001, IDT)

Test method GB/T 4214.1-2000 Acoustics Household and similar electrical appliances noise - Part 1: General requirements (Eqv IEC 60704-1:1997)

Part 1 GB 4706.1-2005 Safety of household and similar electrical appliances. General requirements [IEC 60335-1:2004 (Ed4.1), IDT]

Part 2 GB 4706.27-2008 Safety of household and similar electrical appliances. Particular requirements for fans [IEC 60335-2-80. 2004 (Ed2.1), IDT]

GB/T 5013.1 rated voltage of 450/750V and below rubber insulated cables - Part 1: General requirements (GB/T 5013.1-2008, IEC 60245-1:2003, IDT)

GB/T 5013.2 rated voltage of 450/750V Rubber insulated cables - Part 2: Test methods (GB/T 5013.2-2008, IEC 60245-2:1998, IDT)

GB/T 5013.4 and the rated voltage of 450/750 V Rubber insulated cables Part 4: Cords and flexible cables