Valid

GB/T 45053-2024Turbine compressors for ethylene plant (English PDF)

乙烯装置用透平压缩机

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 45053-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 28, 2024

Implementation date

November 28, 2024

Scope

GB/T 45053-2024 is the English-translated version of 乙烯装置用透平压缩机.

GB/T 45053-2024 is the Chinese standard "Turbine compressors for ethylene plant". Its scope clause reads: This document specifies the classification, technical requirements, test methods, inspection rules, packaging, transportation and Storage.

This document is applicable to single-axis centrifugal compressors such as cracking gas compressors, propylene compressors, ethylene compressors or multi-component refrigeration compressors for ethylene plants.

The production and manufacturing of compressors (referred to as "compressors"). This document is not applicable to axial flow compressors and integrally geared compressors.

Found what you need?

Document preview — GB/T 45053-2024

National Standard of the People's Republic of China

ICS: 23.120
Classification: J 72

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 Category
5.1 Ethylene Plant
5.2 Compressors for ethylene plants
6 Technical Requirements
6.1 General requirements
6.2 Mechanical Structure
6.3 Aerodynamic performance
6.4 Rotor dynamics
6.5 Materials
6.6 Painting
6.7 Auxiliary equipment
6.8 Automatic Control and Remote Monitoring
6.9 Mechanical properties evaluation
7 Test methods
7.1 General requirements
7.2 Aerodynamic performance calibration
7.3 Noise
8 Inspection Rules
8.1 General requirements
8.2 Factory Inspection
9 Packaging, transportation and storage
9.1 Packaging
9.2 Transportation
9.3 Storage

1 Scope

This document specifies the classification, technical requirements, test methods, inspection rules, packaging, transportation and

Storage.

The production and manufacturing of compressors (referred to as "compressors").

This document is not applicable to axial flow compressors and integrally geared compressors.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 755 Ratings and performance of rotating electrical machines

GB/T 1174 Casting bearing alloys

GB/T 3141-1994 ISO viscosity classification for industrial liquid lubricants

GB/T 3767 Acoustics - Determination of sound power level and sound energy level of noise source by sound pressure method - Engineering method for approximate free field above reflecting surface

GB/T 3836 (all parts) Explosive atmospheres

GB/T 5677 Radiographic testing of castings

GB/T 7233.2 Ultrasonic testing of steel castings Part 2.High pressure steel castings

GB/T 9239.1-2006 Mechanical vibration steady-state (rigid) rotor balancing quality requirements Part 1.Specifications and balance tolerances test

GB/T 9443 Penetrant testing of cast steel and cast iron

GB/T 9444 Magnetic Particle Testing of Steel and Iron Castings

GB/T 18329.1 Sliding bearings Multilayer metal sliding bearings Part 1.Ultrasonic testing of bonded bearings with alloy thickness >= 0.5 mm

Nondestructive Testing

GB/T 18329.3 Sliding bearings Multilayer metal sliding bearings Part 3.Non-destructive penetrant testing

GB 18613 Energy efficiency limit values and energy efficiency grades for electric motors

GB/T 25630 Turbine compressor performance test procedures

GB/T 28574 Special purpose steam turbines for petroleum, petrochemical and natural gas industries

GB 31571 Petrochemical Industry Pollutant Emission Standard

GB/T 37400.12 General technical requirements for heavy machinery Part 12.Painting

HG/T 20615 Steel Pipe Flange (Class Series)

HG/T 20623 Large Diameter Steel Pipe Flange (Class Series)

JB/T 2977 Terminology of industrial ventilators, turbo blowers and compressors

JB/T 6888 Technical Specifications for Steel Castings for Fans

NB/T 47013.2 Nondestructive testing of pressure equipment Part 2.Radiographic testing

NB/T 47013.3 Nondestructive testing of pressure equipment Part 3.Ultrasonic testing

GB/T 13277.1 | GB/T 4976 | GB/T 33625 | GB/T 10893 | GB/T 45055 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 3836

Editions of GB/T 45053

Edition	Title	Revision	Status
GB/T 45053-2024	Turbine compressors for ethylene plant	current edition	Current

This page sells the current edition, GB/T 45053-2024. Earlier editions are listed for reference only.

How to Download GB/T 45053-2024

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.