GB/T 21237-2018Wide and heavy plates for line pipe of petroleum and natural gas (English PDF)
石油天然气输送管用宽厚钢板
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 21237-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 14, 2018
Implementation date
February 1, 2019
Scope
GB/T 21237-2018 is the English-translated version of 石油天然气输送管用宽厚钢板.
GB/T 21237-2018 is the Chinese national standard covering wide and heavy plates for line pipe of petroleum and natural gas. It was issued on 14 May 2018 and has been in force since 1 February 2019, replacing GB/T 21237-2007.
The document is under the responsibility of the China Iron and Steel Association. This page is published from the official record of the 2018 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 21237-2018
National Standard of the People's Republic of China
- ICS
- 77.140.50
- Classification
- H 46
- Replacing
- GB/T 21237-2007
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 1.2 Principle
- 1.3 Reagents
- 2 Normative references
- 3.1 General Provisions
- 3.2 Nuclear Safety Criterion
- 4 Designation expression
- 4.1 General
- 4.2 Removal of surface defects
- 4.3 Traffic and Transportation
- 4.4 Working Area
- 5 Calculation of Analysis Results
- 5.2 Main Production Facilities Layout
- 5.3 Auxiliary Facilities Layout
- 5.4 Administration Buildings Area Layout
- 5.5 Outside Construction Layout
- 5.6 Physical Protect System and Entrance Layout
- 6 Precision
- 6.2 Determination of Design Elevation
- 6.3 Step Type Design
- 6.4 Earth (Stone) Work
- 6.5 Water Drainage of Site
- 7 Assessment of results
- 7.2 Underground Pipeline
- 7.3 Overhead Pipeline
- 8 Test report
- 8.2 Transfer Station (Transshipment Wharf)
- 8.3 Railway
- 8.4 Road
- 8.5 Water Transport
- 9.2 Vegetation Arrangement
- 9.3 Tree Species Selection
1 Foreword
GB/T 21237-2018 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 14 May 2018 and has been in force since 1 February 2019.
It replaces the earlier edition GB/T 21237-2007.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 21237-2018 falls under ICS 77.140.50, in the field of metallurgy.
This catalogue holds 3,436 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 21237-2026 (later edition)
GB/T 21237-2007 (earlier edition)
Standards on related subjects:
GB/T 20887.4-2022 — Continuously hot rolled high strength steel sheet and strip for automobile—Part 4: Transformation induced plasticity steel
GB/T 20887.5-2022 — Continuously hot rolled high strength steel sheet and strip for automobile—Part 5: Martensitic steel
GB/T 20887.6-2017 — Continuously hot-rolled high strength steel sheet and strip for automobiles - Part 6: Complex phase steel
GB/T 14164-2026 — Hot rolled wide strip for oil and natural gas line pipe
GB/T 13237-2026 — Cold rolled quality carbon structural steel sheet and strip
5 Classification and status
International classification (ICS): 77.140.50
Chinese Standard Classification (CCS): H 46
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 21237
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 21237-2018 | Wide and heavy plates for line pipe of petroleum and natural gas | current edition | Current |
| GB/T 21237-2007 | Wide and heavy plates for line pipe of petroleum and natural gas | previous edition | Superseded |
This page sells the current edition, GB/T 21237-2018. Earlier editions are listed for reference only.
How to Download GB/T 21237-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 21237-2018
$235.00