Valid

GB/T 19683-2025Rail mounted container gantry cranes (English PDF)

轨道式集装箱门式起重机

Preview PDF

This is a limited preview

Buy now to download the full PDF (32 pages)

Need quotation for your management?

Get a formal quotation for GB/T 19683-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 2, 2025

Implementation date

July 1, 2026

Scope

GB/T 19683-2025 is the English-translated version of 轨道式集装箱门式起重机.

GB/T 19683-2025 is the Chinese standard "Rail mounted container gantry cranes". Its scope clause reads: This document specifies the classification, main technical parameters, technical requirements, inspection rules, marking, and packaging of rail-mounted container gantry cranes.

The requirements for transportation and storage are described, along with the corresponding test methods. This document applies to the design and manufacture of container cranes for loading and unloading 20ft and larger containers.

Found what you need?

Document preview — GB/T 19683-2025

National Standard of the People's Republic of China

ICS: 53.020.20
Classification: J 80
Replacing: GB/T 19683-2005

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1.Scope
2 Normative References
3 Terms and Definitions
4.Classification and Main Technical Parameters 3.
5 Technical Requirements
6.Test Methods
7.Inspection Rule
8.Marking, Packaging, Transport and Storage
References

1 Scope

This document specifies the classification, main technical parameters, technical requirements, inspection rules, marking, and packaging of rail-mounted container gantry cranes.

The requirements for transportation and storage are described, along with the corresponding test methods.

This document applies to the design and manufacture of container cranes for loading and unloading 20ft and larger containers.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 699-2015 High-quality carbon structural steel

GB/T 700-2006 Carbon Structural Steel

GB/T 709-2019 Dimensions, shape, weight and permissible deviations of hot-rolled steel plates and strips

GB/T 755 Ratings and Performance of Rotating Electrical Machines

GB/T 985.1 Recommended bevels for gas welding, shielded metal arc welding, gas shielded welding and high energy beam welding

GB/T 985.2 Recommended bevel for submerged arc welding

GB/T 1184-1996 Geometric Tolerances - Tolerances Without Specified Values

GB/T 1228 High-strength large hexagonal head bolts for steel structures

GB/T 1229 High-strength large hexagonal nuts for steel structures

GB/T 1230 High-strength washers for steel structures

GB/T 1231 High-strength large hexagonal head bolt assemblies for steel structures

GB/T 1591-2018 Low-alloy high-strength structural steel

GB/T 1800.1-2020 Product Geometric Specification (GPS) - Linear Dimensional Tolerances - ISO Notation System - Part 1.Tolerances

The basis of deviation and fit

GB/T 3077-2015 Alloy Structural Steel

GB/T 3220 Container Spreading Gear

GB/T 3766 General rules and safety requirements for hydraulic transmission systems and their components

GB/T 3811 Crane Design Specification

GB/T 4205 Basic and Safety Rules for Human-Machine Interface Signage and Operation

GB/T 4208-2017 Degrees of protection provided by enclosures (IP code)

GB/T 5117 Welding Electrodes for Non-Alloy Steel and Fine-Grained Steel

GB/T 5118 Welding Electrodes for Heat-Resistant Steel

GB/T 5226.32 Electrical Safety of Machinery - Electrical Equipment of Machinery - Part 32.Technical Conditions for Lifting Machinery

GB/T 5293 Classification requirements for solid welding wires, flux-cored welding wires and wire-flux combinations for non-alloy steel and fine-grained steel used in submerged arc welding

GB/T 5905.1 Crane Inspection and Testing Standards Part 1.General Rules

GB/T 5973 Wedge joints for wire ropes

GB/T 5976 Wire Rope Clamps

GB/T 20062 | GB/T 20303.1 | GB/T 20303.5 | GB/T 21458 | GB/T 18874.5 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Editions of GB/T 19683

Edition	Title	Revision	Status
GB/T 19683-2025	Rail mounted container gantry cranes	current edition	Current
GB/T 19683-2005	Rail mounted container gantry cranes	previous edition	Superseded

This page sells the current edition, GB/T 19683-2025. Earlier editions are listed for reference only.

How to Download GB/T 19683-2025

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.