GB/T 36410.2-2018Energy consumption evaluation methods of port equipment—Part 2: Rail mounted container gantry crane (English PDF)
港口设备能源消耗评价方法 第2部分：轨道式集装箱门式起重机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36410.2-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
January 1, 2019
Scope
GB/T 36410.2-2018 is the English-translated version of 港口设备能源消耗评价方法 第2部分：轨道式集装箱门式起重机.
GB/T 36410.2-2018 is Part 2 of the Chinese national methods for evaluating the energy consumption of port equipment, and deals with rail-mounted container gantry cranes.
It specifies the conditions for energy consumption tests, including ambient temperature, wind speed, grid voltage fluctuation and imbalance, rail inclination and the state of the crane under test, which must operate normally without parameters adjusted to improve efficiency.
It also covers measuring instruments, the test method and the evaluation method, with a normative annex for the energy-saving test report and another setting energy efficiency classes.
Terms and instrument requirements are taken from Part 1 on quay container cranes. It does not apply to cranes that handle only empty containers. Port operators and testing bodies use it to rate crane energy use. It was issued on 7 June 2018 and has applied since 1 January 2019.
Found what you need?
Document preview — GB/T 36410.2-2018
National Standard of the People's Republic of China
- ICS
- 53.020.20; 03.220.40
- Classification
- R 46
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Testing Requirements
- 5 Test Method
- 6 Evaluation Method
- Appendix A (Normative) Energy-Saving Test Report for Orbital Container Gantry Cranes
- Appendix B (Normative Appendix) Energy Efficiency Class for Rail Container Gantry Cranes
Foreword
GB/T 36410 "Evaluation Method for Energy Consumption of Port Equipment" is divided into 5 parts.
--- Part 1. Shore container cranes;
--- Part 2. Rail-mounted container gantry cranes;
--- Part 3. Bridge Grab Ship Unloader;
--- Part 4. Continuous cargo shippers;
--- Part 5. Harbor tractors.
This part is part 2 of GB/T 36410.
This section was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This part of GB/T 36410 specifies the energy consumption testing requirements, detection methods and assessments for rail-mounted container gantry cranes. Law and so on.
This section applies to the evaluation of energy consumption of rail-mounted container gantry cranes.
This section does not apply to rail container gantry cranes that handle empty containers.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 19683 Orbital Container Gantry Crane
GB/T 36410.1-2018 Method for evaluating the energy consumption of port facilities Part 1. Shore container cranes
Safety regulations for JT/T 566 rail container gantry cranes
3 Terms and Definitions
The terms and definitions defined in GB/T 36410.1-2018 apply to this document.
4 Testing requirements
4.1 Basic requirements
4.1.1 The ambient temperature should be 0 °C ~ 40 °C, the maximum relative humidity should not exceed 95%.
4.1.2 The maximum wind speed should not exceed 5 levels.
4.1.3 The deviation of the input voltage fluctuation of the grid should be in the range of -10%~6% of the rated voltage. The three-phase voltage imbalance rate should not be large. At 1.5%.
4.2 Tested crane requirements
4.2.1 The normal operation of rail-type container gantry cranes (referred to as cranes) shall comply with the relevant requirements of GB/T 19683 and JT/T 566, Crane parameters should not be adjusted to improve energy efficiency.
4.2.2 The cranes should be inspected by the competent authority of the industry and have relevant certifications before they can implement on-site energy consumption tests.
4.2.3 The crane shall be on a flat rail surface with an inclination of not more than 2.5 per thousand; the partial load shall be within the prescribed range of the crane.
4.2.4 Before the test, the height of the crane and the position of the trolley should be checked, and the accuracy of the crane should be met.
4.3 Measuring Instrument Requirements
Measuring instruments should comply with the relevant provisions of GB/T 36410.1-2018.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 36410.2-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 19683-2025 — Rail mounted container gantry cranes
GB/T 36410.1-2018 — Energy consumption evaluation methods of port equipment—Part 1:Quayside container crane
JT/T 566-2004 — Safety rules for the rail-mounted transtainer
Secure payment via Stripe
Payments accepted
GB/T 36410.2-2018
$145.00