Valid

GB/T 19224-2017Determination of the relative degree of oxidation in bituminous coal (English PDF)

烟煤相对氧化度测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for GB/T 19224-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

April 1, 2018

Scope

GB/T 19224-2017 is the English-translated version of 烟煤相对氧化度测定方法.

GB/T 19224-2017 is the Chinese national method for measuring how far a bituminous coal has oxidised in the open, using alkaline extraction.

It specifies the principle, the reagents and materials, the apparatus, the preparation of the sample, the procedure, the calculation and expression of the relative degree of oxidation, the precision of the method and the test report.

It applies to bituminous coal oxidised under natural conditions, that is coal that has been stockpiled or exposed, whose behaviour in a boiler or a coke oven changes as it weathers.

Mines, power plants and coke works use it. It replaces GB/T 19224-2003, was issued on 7 September 2017 and has applied since 1 April 2018.

Found what you need?

Document preview — GB/T 19224-2017

National Standard of the People's Republic of China

ICS
73.040
Classification
D 21
Replacing
GB/T 19224-2003

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Method summary
  • 4 Reagents and materials
  • 5 equipment
  • 6 determination step
  • 7 Results Calculation and Presentation
  • 8 Method precision
  • 9 Test Report
  • Appendix A (informative) Test result description

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 19224-2003 "Determination of relative oxidation of bituminous coal." This standard compared with GB/T 19224-2003, In addition to editorial changes, the main technical content changes as follows.

--- Increasing the wetting agent (see 4.1);

--- The test coal particle size from less than 3mm to less than 0.2mm (see 6.1,.2003 Edition Chapter 6);

--- Added "test report" chapter (see Chapter 9).

1 Scope

This standard specifies the method of alkaline extraction method for determination of relative oxidation of bituminous coal feed, reagents and materials, equipment, determination steps, the results of the meter Computation and expression, method precision and test report.

This standard applies to natural conditions of bituminous coal oxidation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 483 Methods of analysis of coal - General provisions of test methods

3 Method summary

A certain amount of bituminous coal extract with sodium hydroxide solution after the oxidation of humic acid, the alkali extract colorimetric determination, according to the solution of Light transmittance to determine the relative oxidation of bituminous coal.

4 Reagents and materials

Unless otherwise specified, only reagents identified as analytically pure and distilled or deionized water or rather pure water are used in the assay.

4.1 Wetting agents. Octylphenoxypolyethoxyethanol nonionic surfactant, 100% strength, should not be diluted.

Note Wetting agents can also use 20g/L sodium lauryl sulfate solution.

4.2 sodium hydroxide solution .1mol/L. Weigh sodium hydroxide 40g, dissolved in water and diluted to 1000mL.

4.3 filter paper. Qualitative medium-speed filter paper.

5 Equipment

5.1 Spectrophotometer

5.2 cuvette. 10mm.

5.3 hot plate or electric furnace. Temperature adjustable.

5.4 Balance. Divide the value of 0.001g.

5.5 Thermometer. Range 0 °C ~ 100 °C, the smallest sub-value of 0.5 °C.

5.6 Timer. Can be timed to 30min, accurate to seconds.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 19224

EditionTitleRevisionStatus
GB/T 19224-2017Determination of the relative degree of oxidation in bituminous coalcurrent editionCurrent
GB/T 19224-2003Determination of the relative degree of oxidation in bituminous coalprevious editionSuperseded

This page sells the current edition, GB/T 19224-2017. Earlier editions are listed for reference only.

How to Download GB/T 19224-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
23 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 19224-2017

$95.00