GB/T 19068.2-2017Small wind turbines—Part 2: Test method (English PDF)

Foreword

GB/T 19068 "small wind turbine" is divided into the following three sections.

--- Part 1. Technical conditions;

--- Part 2. Test methods;

--- Part 3. Wind tunnel test methods.

This section GB/T 19068 Part 2.

This section drafted in accordance with GB/T 1.1-2009 given rules.

This Part replaces GB/T 19068.2-2003 "off-grid wind turbine generator Part 2 Test Methods."

This section compared with GB/T 19068.2-2003, in addition to editorial changes outside the main technical changes are as follows.

--- Expand the scope of this section (see Chapter 1, 2003 edition Chapter 1);

--- Increasing the requirements of the position of the wind tower inside the test site (see 5.1.3);

--- Increased site calibration and measurement sector requirements (see 5.1.6);

--- Increased the confirmation of the prototype test, inspection and commissioning, test prototype electrical connection and prototype testing equipment installation and layout Content (see 5.3, 5.4 and 5.5);

--- Increasing the static balance of blades and the tip of the axial runout test content (see 6.1);

--- Modify the unit power characteristics of the test (see 6.3, 2003 version 4.2 and 4.3);

--- Increasing the unit noise level in accordance with GB/T 22516 Determination of the choice (see 6.5.2);

--- Increased durability test content (see 6.6);

--- Increased vibration test and evaluation of the unit (see 6.7);

--- Increasing the electrical subsystem test and coating test content (see 6.8 and 6.9);

--- Deleted electromagnetic interference determination (see 2003 version 4.5.2);

--- Deleted all the provisions of the test on vertical axis wind turbine (see Chapter 1 of the 2003 edition, 3.3.2, Table 1 and A.2);

--- Increased test report on the power characteristics of the test and durability test (see Chapter 7);

--- Modify the appendix of the format and content of the test report to the normative appendix (see Appendix C, Appendix B of 2003).

1 Scope

GB/T 19068 provisions of this part of a small wind turbine (hereinafter referred to as "unit") test conditions and test methods.

This section applies to the wind wheel sweep area of less than 200m², the resulting voltage is lower than the AC 1000V or DC 1500V grid or Test of off-grid small horizontal axis wind turbine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all revisions) applies to this document.

GB/T 9239.1 mechanical vibration constant (rigid) rotor balance quality requirements - Part 1: Specification and balance of tolerance test

GB/T 10760.2 Small generators for wind turbines - Part 2: Test methods

GB/T 17646-2017 small wind turbine

GB/T 18451.2-2012 wind turbine power characteristics test

GB/T 22516 wind turbine noise measurement method

JB/T 7879 wind machine product code preparation rules

JB/T 10399 Off-grid wind turbine rotor blades

3 Terms and definitions

GB/T 17646-2017 and GB/T 18451.2-2012 Terms and definitions apply to this document.

4 Symbols and abbreviations

The symbols and abbreviations defined in GB/T 17646-2017 and GB/T 18451.2-2012 apply to this document.

5 Test conditions