GB/T 18959-2023Code of practice for wood protection in storage (English PDF)
木材保管规程
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18959-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 17, 2023
Implementation date
October 1, 2023
Scope
GB/T 18959-2023 is the English-translated version of 木材保管规程.
GB/T 18959-2023 sets out how timber is looked after while it is in store. It establishes the storage procedure and specifies the general requirements, the physical storage of logs, the physical storage of sawn timber and the chemical storage of wood, and it describes the verification methods: process records, documents and measurement.
It applies to timber storage in wood production, processing, use and circulation.
It defines wood storage as protecting and managing timber by physical and chemical means, physical storage as the methods that hold off fungi, insect eggs and checking without changing the chemical make-up of the wood, and chemical storage as spraying, brushing or impregnating a wood protectant.
It cites GB 3095, GB 22280, GB/T 29399, GB/T 29406.1 and LY/T 1069. It replaces GB/T 18959-2003, was issued on 17 March 2023 and has applied since 1 October 2023.
Found what you need?
Document preview — GB/T 18959-2023
National Standard of the People's Republic of China
- ICS
- 79.020
- Classification
- B 68
- Replacing
- GB/T 18959-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
This document replaces GB/T 18959-2003 "Wood Storage Regulations". Compared with GB/T 18959-2003, except for structural adjustment and editing in addition to sexual changes, the main technical changes are as follows:
a) Added terms and definitions (see Chapter 3);
b) The timber storage method is deleted (see Chapter 4 of the 2003 edition);
c) Timber storage procedures have been added (see Chapter 4);
d) Changed "timber storage principles" to "general requirements" and changed the content (see Chapter 5, Chapter 3 of the 2003 edition);
e) The physical storage of logs has been changed (see Chapter 6, Chapter 5 of the 2003 edition);
f) Changed the physical storage of sawn timber (see Chapter 7, Chapter 6 of the 2003 edition);
g) Changed the chemical storage of wood (see Chapter 8, Chapter 7 of the 2003 edition);
h) Increased verification method (see Chapter 9).
1 Scope
This document establishes wood storage procedures, specifies general requirements, physical storage of logs, physical storage of sawn timber and chemical storage of wood, describes verification methods such as process records, supporting documents and measurements are specified.
This document is applicable to timber storage in the fields of timber production, processing, use and circulation.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB 3095 Ambient Air Quality Standard
GB 3838 Environmental Quality Standards for Surface Water
GB 8978 Comprehensive Wastewater Discharge Standard
GB/T 14019 Wood Preservation Terminology
GB/T 15035 Wood Drying Terms
GB 16297 Comprehensive Emission Standard of Air Pollutants
GB 22280 Preservative wood production specification
GB/T 29399 Wood Insect (Ant) Technical Specification
GB/T 29406.1 Safety Code for Wood Preservation Factory Part 1: Factory Design
GB/T 29406.2 Safety Code for Wood Preservation Factory Part 2: Operation
GB 50016 Code for Fire Protection Design of Buildings
GB 50354 Code for Fireproof Construction and Acceptance of Building Interior Decoration
LY/T 1069 Sawn Timber Air Drying Process Regulations
LY/T 1371 log back Leng
3 Terms and Definitions
GB/T 14019, GB/T 15035 and the following terms and definitions apply to this document.
3.1 Wood storage
During the storage of wood, physical and chemical methods are used to protect and manage it.
3.2 Physical storage
On the premise of not changing the chemical composition and performance of wood, it can prevent fungi, insect egg hatching and growth, wood cracking and other factors affecting quality the custodial method of occurrence and development.
3.3 Chemical storage
It is a storage method that uses spraying, coating, impregnation and other methods to make the wood protective agent chemically react with the wood components to produce different protective effects.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 3095Ambient air quality standards
- GB 3838Environmental quality standards for surface water
- GB 8978Integrated wastewater discharge standard
- GB/T 14019Vocabulary for wood preservation
- GB/T 15035Terminology in wood drying
- GB 16297Integrated emission standard of air pollutants
LY/T 1371
Similar standards
Editions of GB/T 18959
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 18959-2023 | Code of practice for wood protection in storage | current edition | Current |
| GB/T 18959-2003 | Code of practice for wood protection in storage | previous edition | Superseded |
This page sells the current edition, GB/T 18959-2023. Earlier editions are listed for reference only.
How to Download GB/T 18959-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16297-1996 — Integrated emission standard of air pollutants
GB 22280-2008 — Specification for production of preservative-treated wood
GB 3095-2012 — Ambient air quality standards
Secure payment via Stripe
Payments accepted
GB/T 18959-2023
$185.00