GB/T 18773-2008Environmental sanitation standard for incineration of medical treatment wastes (English PDF)

Foreword

This standard replaces GB/T 18773-2002 "medical waste incineration environmental health standards," this standard and GB/T 18773-2002 phase Than the main changes are as follows:

--- Change the standard name;

--- An increase in workplace air of toxic substances subject to concentration limits;

--- Increased water pollutant discharge limits;

--- Increased workplace noise limits;

--- Increasing the non-noise workplace noise limits;

--- Increasing the threshold odor pollutants Factory;

--- Remove the medical waste incineration residues emission standards, increased solid waste pollution control requirements. The standard proposed by the People's Republic of China Ministry of Construction. This standard by the Ministry of Construction and Urban Environmental Health Technical Standards focal point under the jurisdiction of the Shanghai City Appearance and Environmental Sanitation Administration. This standard was drafted. Shenyang City Environmental Sanitation Engineering Design and Research Institute. The main drafters of this standard. Liang Wen, Li Ji, Liu Tongwu, Sui Ru Nan Lin Xiaojuan, Chen Jun, Wang Rongsen, Jin Zhiying, full Guohong. This standard was first released in July 2002. Medical waste incineration Environmental Health Criteria

1 Scope

GB/T 18773-2008 is the Chinese national standard on environmental sanitation standard for incineration of medical treatment wastes, in the field of environment and health protection, safety. The /T suffix marks it as a recommended standard: it is not compulsory by itself, but it becomes binding as soon as a contract, a tender or a customer specification calls it up - which in practice is how most foreign buyers meet it. It was issued on 19 June 2008 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 April 2009. Classification: ICS 13.030.99, CCS Z68. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the incineration of medical waste and environmental sanitation standard value monitoring methods. This standard applies to medical waste incineration.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Determination of the glass electrode method

GB/T 6920 Water Quality pH value

GB/T 6921 Determination of the concentration of atmospheric particulates Determination of

GB/T 7466 Water Quality total chromium

GB/T 7467 Water quality - Determination of hexavalent chromium diphenyl hydrazine spectrophotometry Determination of

GB/T 7468 Water quality total mercury - Cold atomic absorption spectrophotometry

GB/T 7469 Water quality Determination of total mercury - Potassium permanganate - potassium persulfate digestion method dithizone spectrophotometry Determination of

GB/T 7470 Water quality dithizone spectrophotometry

GB/T 7471 Water quality - Determination of cadmium dithizone spectrophotometry

GB/T 7475 Water quality copper, zinc, lead and cadmium by atomic absorption spectrometry

GB/T 7478 Water quality Determination of ammonium - Distillation and titration

GB/T 7479 Water quality - Determination of ammonium Nessler's reagent colorimetric Determination of

GB/T 7485 Water Quality total arsenic diethyl dithiocarbamate spectrophotometry silver The first part of the determination of

GB/T 7486 Water quality cyanide. Determination of total cyanide