Valid

GB/T 18171-2017Chlorothalonil aqueous suspension concentrates (English PDF)

百菌清悬浮剂

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 18171-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 1, 2017

Implementation date

May 1, 2018

Scope

GB/T 18171-2017 is the English-translated version of 百菌清悬浮剂.

GB/T 18171-2017 sets the quality requirements for chlorothalonil aqueous suspension concentrates, the flowable formulations made from chlorothalonil technical with suitable auxiliaries and fillers, in 40% and 54% strengths.

It covers composition and appearance, the control items for each strength, including the chlorothalonil mass fraction and limits on the impurities hexachlorobenzene and decachlorobiphenyl, and the test methods, marking, labelling, packaging, storage, transport and guarantee period.

The referenced methods include pH, suspensibility, wet sieve fineness, persistent foaming, pourability and heat and low-temperature storage stability, together with the acceptance and sampling rules for commercial pesticides.

An informative annex gives other names, structural formulas and physico-chemical data of these substances. It replaces GB 18171-2000, was issued on 1 November 2017 and has applied since 1 May 2018.

Found what you need?

Document preview — GB/T 18171-2017

National Standard of the People's Republic of China

ICS
65.100.30
Classification
G 25
Replacing
GB 18171-2000

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Requirements

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 18171-2000 "chlorothalonil SC", compared with GB/T 18171-2000, the main technical changes as follows.

--- Increased by 54% specification;

--- 40% specification hexachlorobenzene index from not higher than 0.2g/kg to no higher than 0.02g/kg;

--- Added deca-biphenyl control index;

--- wet sieve test (through 45µm test sieve) from not less than 99% to wet sieve test (through 75µm test sieve) not less than 99.5%;

--- dumping dumping residue from not more than 5.0% to not more than 6.0%;

--- After the "hot storage appearance, chlorothalonil mass fraction, suspension rate, sieve still meet the standard requirements" to "after storage chlorothalonil mass fraction is not Lower than 97% before storage, the suspension rate still meets the standard requirements. "

1 Scope

This standard specifies the chlorothalonil suspending agent requirements, test methods and signs, labels, packaging, storage and delivery and guarantee period.

This standard applies to chlorothalonil by the original drug, suitable additives and fillers processed chlorothalonil SC.

NOTE Other names, structural formulas and basic physico-chemical parameters of chlorothalonil, hexachlorobenzene and deca-biphenyl are given in Appendix A.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1601 Determination of pesticide pH value

GB/T 1604 commodity pesticide acceptance rules

Commercial pesticides sampling method

GB 3796 Pesticide packaging General

Laboratory use specifications and test methods for analysis GB/T 6682-2008

Representation and determination of rules for repair of numerical values and limit values GB/T 8170-2008

GB/T 14825 pesticide suspension rate determination method

GB/T 16150 Pesticide powder, wettable powder fineness determination

Determination of heat storage stability of GB/T 19136 pesticides

GB/T 19137 Determination of low temperature stability of pesticides

Pesticide persistent foaming - Determination of GB/T 28137

GB/T 31737 pesticide dumping method

3 Requirements

3.1 Composition and appearance

Chlorothalonil SC is made of standard chlorothalonil, additives and fillers. It is a flowable, easy-to-measure volume suspension Body, the deposit may precipitate during the storage, but shaking hands, can restore the status quo, no caking.

3.2 Specifications

Chlorothalonil SC should also meet the requirements of Table 1.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 18171

EditionTitleRevisionStatus
GB/T 18171-2017Chlorothalonil aqueous suspension concentratescurrent editionCurrent
GB 18171-2000Chlorothalonil aqueous suspension concentratesprevious editionSuperseded

This page sells the current edition, GB/T 18171-2017. Earlier editions are listed for reference only.

How to Download GB/T 18171-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 18171-2017

$165.00