GB/T 1592.1-2016Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone (English PDF)
农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分:通用要求、安全要求、防护罩尺寸和空隙范围
This is a limited preview
Buy now to download the full PDF (9 pages)
Need quotation for your management?
Get a formal quotation for GB/T 1592.1-2016 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 1592.1-2016 is the English-translated version of 农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分:通用要求、安全要求、防护罩尺寸和空隙范围.
GB/T 1592.1-2016 — This Part of GB/T 1592 specifies general specifications for rear-mounted power take-off types 1, 2, 3 and 4 of agricultural tractors of which the minimum track is greater than 1150 mm, including speed, safety requirements, master shield size and clearance zone of power take-off (for the requirements for the agricultural tractors of which the minimum track is less than or equal to 1150 mm, see GB/T 1592.2).
This Part is applicable to rear-mounted power take-off of agricultural tractors (hereinafter referred to as the power take-off / PTO).
Found what you need?
Document preview — GB/T 1592.1-2016
National Standard of the People's Republic of China
- ICS
- 65.060.10
- Classification
- T 67
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...3
- 1 Scope...6
- 2 Normative references...6
- 3 Terms and definitions...7
- 4 Technical specifications...7
- 5 Requirements for multi-speed PTO...8
- 6 Safety requirements...8
- 7 Aperture size of PTO master shield and PTO clearance zone...9
Foreword
GB/T 1592 "Agricultural tractors - Rear-mounted power take-off types 1, 2, 3
and 4" consists of the following three parts:
- Part 1: General specifications, safety requirements, dimensions for master
shield and clearance zone;
- Part 2: Narrow-track tractors, dimensions for master shield and clearance
zone;
- Part 3: Main PTO dimensions and spline dimensions, location of PTO.
This Part is Part 1 of GB/T 1592.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 1592.1-2008 "Agricultural tractors - Rear- mounted
power take-off types 1, 2 and 3 - Part 1: General specifications safety
requirements dimensions for master shield and clearance zone".
Compared with GB/T 1592.1-2008, in addition to editorial modifications, the
main technical differences in this Part are as follows:
- modified the standard name;
- changed "wheel track" to "minimum track" (see Clause 1 of this Edition,
Clause 1 of Edition 2008);
- added the requirements for PTO type 4 of tractors (see Clause 1, 4, 5, 6, 7
of this Edition);
- modified the requirements for rotation direction of tractor PTO (see 4.2 of
this Edition, 4.2 of Edition 2008);
- added the method of determination for standard rotary speed of PTO (see
4.3 of this Edition);
- modified the recommended PTO powers at engine rated rotary speed (see
Table 1 of this Edition, Table 1 of Edition 2008);
- deleted "the recommended PTO powers at engine rated rotary speed are
determined in accordance with OECD Rule 1 or Rule 2" (see Table 1 of
Edition 2008);
- added PTO rotary speed, spline, diameter specification and type code (see
Table 1);
Agricultural tractors - Rear-mounted power take-off
types 1, 2, 3 and 4 - Part 1: General specifications,
safety requirements, dimensions for master shield
and clearance zone
1 Scope
This Part of GB/T 1592 specifies general specifications for rear-mounted power
take-off types 1, 2, 3 and 4 of agricultural tractors of which the minimum track
is greater than 1150 mm, including speed, safety requirements, master shield
size and clearance zone of power take-off (for the requirements for the
agricultural tractors of which the minimum track is less than or equal to 1150
mm, see GB/T 1592.2).
This Part is applicable to rear-mounted power take-off of agricultural tractors
(hereinafter referred to as the power take-off / PTO).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 3871.3, Agricultural tractors - Test procedures - Part 3: Power tests for
power take-off (GB/T 3871.3-2006, ISO 789-1:1990, MOD)
GB/T 17126.2, Agricultural Tractors and Machinery - Power Take-Off Drive
Shafts and Power-Input Connection - Part 2: Specification for Use of PTO
Drive Shafts, And Position and Clearance of PTO Drive Line and PIC for
Various Attachments (GB/T 17126.2-2009, ISO 5673-2:2005, IDT)
GB/T 19408.1, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 1: Dimensions of hitch-hooks (GB/T
19408.1-2003, ISO 6489-1:2001, IDT)
GB/T 19408.2, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 2: Specifications for clevis coupling 40
(GB/T 19408.2-2009, ISO 6489-2:2002, IDT)
GB/T 19408.3, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 3: Tractor drawbar (GB/T 19408.3-2009,
ISO 6489-3:2004, IDT)
GB/T 19408.4, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 4: Dimensions of piton-type coupling (GB/T
19408.4-2009, ISO 6489-4:2004, IDT)
ISO 6489-5:2011, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 5: Specifications for non-swivel clevis
couplings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 power take-off; PTO
an external drive shaft for transmitting rotational power to farm tool at the rear
of a tractor
4 Technical specifications
4.1 The power take-off is divided into four types (see Table 1).
4.2 The direction of rotation of PTO is clockwise when viewed from behind the
tractor. Unless it is a PTO synchronized with the drive wheels, when the tractor
is driving in reverse, it can rotate counterclockwise.
4.3 The standard speed of PTO can be reached within one or more speed
ranges of the engine.
NOTE: The standard rotary speed of PTO is the speed at 80%~90% of the engine's
nominal speed.
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3871.3Agricultural tractors - Test procedures - Part 3: Power tests for power take-off
- GB/T 3871.3-2006Agricultural tractors - Test procedures - Part 3: Power tests for power take-off
- GB/T 17126.2Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
- GB/T 17126.2-2009Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
- GB/T 19408.1Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks
- GB/T 19408.2Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40
ISO 789 · ISO 5673 · ISO 6489
Cited by
- GB 18447-2025Safety technical specifications for tractors
- GB/T 10394.2-2025Equipment for harvesting - Forage harvesters - Part 2: Specification of characteristics and performance
- GB/T 19408.6-2020Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 6: Specifications for nonswivel clevis couplings
- LY/T 1041-2018Forestry machinery. Seed bed formers for nursery
- LY/T 2888-2017Forestry machinery--Sidewalk trench cultivator
- GB/T 1592.2-2016Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 2: Narrow-track tractors, dimensions for master shield and clearance zone
How to Download GB/T 1592.1-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17126.2-2009 — Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
GB/T 19408.1-2003 — Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks
GB/T 19408.2-2009 — Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40
GB/T 1592.1-2016
$85.00