GB/T 1592.2-2016Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 2: Narrow-track tractors, dimensions for master shield and clearance zone (English PDF)
农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分:窄轮距拖拉机防护罩尺寸和空隙范围
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 1592.2-2016 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
February 24, 2016
Implementation date
September 1, 2016
Scope
GB/T 1592.2-2016 is the English-translated version of 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分:窄轮距拖拉机防护罩尺寸和空隙范围.
GB/T 1592.2-2016 — This Part of GB/T 1592 specifies the dimensions for master shield and clearance zone for rear-mounted power take-off types 1, 2 of wheeled tractors powered by single-cylinder diesel engine and narrow-track (gauge) tractors of which the minimum track is less than or equal to 1150 mm.
This Part is applicable to rear-mounted power take-off of agricultural tractors (hereinafter referred to as the power take-off / PTO).
Found what you need?
Document preview — GB/T 1592.2-2016
National Standard of the People's Republic of China
- ICS
- 65.060.10
- Classification
- T 67
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword...3
- 1 Scope...6
- 2 Normative references...6
- 3 Terms and definitions...7
- 4 Technical specifications...7
- 5 General specifications...8
- 6 Aperture size of PTO master shield and PTO clearance zone...8
Foreword
GB/T 1592 "Agricultural tractors - Rear-mounted power take-off types 1, 2, 3
and 4" consists of the following three parts:
- Part 1: General specifications, safety requirements, dimensions for master
shield and clearance zone;
- Part 2: Narrow-track tractors, dimensions for master shield and clearance
zone;
- Part 3: Main PTO dimensions and spline dimensions, location of PTO.
This Part is Part 2 of GB/T 1592.
This Part was drafted in accordance with the rules given in GB/T 1.1-2009.
This Part replaces GB/T 1592.2-2008 "Agricultural tractors - Rear- mounted
power take-off types 1, 2 and 3 - Part 2: Narrow-track tractors dimensions for
master shield and clearance zone".
Compared with GB/T 1592.2-2008, in addition to editorial modifications, the
main technical differences in this Part are as follows:
- modified the standard name;
- changed "wheel track" to "minimum track" (see Clause 1 of this Edition,
Clause 1 of Edition 2008);
- added "wheeled tractors powered by single-cylinder diesel engine" (see
Clause 1 and 3.3 of this Edition);
- modified power range of type A tractor PTO (see 3.2 of this Edition, 3.2 of
Edition 2008);
- modified the requirements for rotation direction of tractor PTO (see 4.2 of
this Edition, 4.2 of Edition 2008);
- added the method of determination for standard rotary speed of PTO (see
4.3 of this Edition);
- added that the clearance zone on the towing vehicle shall meet the
requirements of ISO 6489-5:2011 (see Figure 1 of this Edition).
This Part uses redrafting method to modify and adopt ISO 500-2:2014
"Agricultural tractors - Rear-mounted power take-off types 1, 2 and 3 - Part 2:
Narrow-track tractors, dimensions for master shield and clearance zone".
Agricultural tractors - Rear-mounted power take-off
types 1, 2, 3 and 4 - Part 2: Narrow-track tractors,
dimensions for master shield and clearance zone
1 Scope
This Part of GB/T 1592 specifies the dimensions for master shield and
clearance zone for rear-mounted power take-off types 1, 2 of wheeled tractors
powered by single-cylinder diesel engine and narrow-track (gauge) tractors of
which the minimum track is less than or equal to 1150 mm.
This Part is applicable to rear-mounted power take-off of agricultural tractors
(hereinafter referred to as the power take-off / PTO).
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB/T 1592.1-2016, Agricultural tractors - Rear-mounted power take-off types
1, 2, 3 and 4 - Part 1: General specifications, safety requirements,
dimensions for master shield and clearance zone (ISO 500-1:2014, MOD)
GB/T 3871.3, Agricultural tractors - Test procedures - Part 3: Power tests for
power take-off (GB/T 3871.3-2006, ISO 789-1:1990, MOD)
GB/T 17126.2, Agricultural Tractors and Machinery - Power Take-Off Drive
Shafts and Power-Input Connection - Part 2: Specification for Use of PTO
Drive Shafts, And Position and Clearance of PTO Drive Line and PIC for
Various Attachments (GB/T 17126.2-2009, ISO 5673-2:2005, IDT)
GB/T 19408.1, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 1: Dimensions of hitch-hooks (GB/T
19408.1-2003, ISO 6489-1:2001, IDT)
GB/T 19408.2, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 2: Specifications for clevis coupling 40
(GB/T 19408.2-2009, ISO 6489-2:2002, IDT)
GB/T 19408.3, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 3: Tractor drawbar (GB/T 19408.3-2009,
ISO 6489-3:2004, IDT)
GB/T 19408.4, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 4: Dimensions of piton-type coupling (GB/T
19408.4-2009, ISO 6489-4:2004, IDT)
GB/T 19408.5, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 5: Dimensions of ball-type coupling device
(GB/T 19408.5-2009, ISO 24347:2005, IDT)
ISO 6489-5:2011, Agricultural vehicles - Mechanical connections between
towed and towing vehicles - Part 5: Specifications for non-swivel clevis
couplings
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 power take-off; PTO
an external drive shaft for transmitting rotational power to farm tool at the rear
of a tractor
3.2 type A tractor
a tractor that the track is fixed or adjustable; the minimum wheel track of at least
one axle is not more than 950 mm; the power of PTO determined according to
GB/T 3871.3 is less than 29 kW
3.3 type B tractor
a tractor that the track is fixed or adjustable; the minimum track of at least one
axle is greater than 950 mm but not greater than 1150 mm; AND a wheeled
tractor powered by single-cylinder diesel engine
4 Technical specifications
4.1 The PTO shall be type 1 or type 2 specified in GB/T 1592.1.
4.2 The direction of rotation of PTO is clockwise when viewed from behind the
tractor. Unless it is a PTO synchronized with the drive wheels, when the tractor
is driving in reverse, it can rotate counterclockwise.
4.3 The standard speed of PTO can be reached within one or more speed
......
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1592.1-2016Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
- GB/T 3871.3Agricultural tractors - Test procedures - Part 3: Power tests for power take-off
- GB/T 3871.3-2006Agricultural tractors - Test procedures - Part 3: Power tests for power take-off
- GB/T 17126.2Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
- GB/T 17126.2-2009Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
- GB/T 19408.1Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks
ISO 500 · ISO 789 · ISO 5673 · ISO 6489 · ISO 24347
Cited by
- GB 18447-2025Safety technical specifications for tractors
- JB/T 11318-2013Single-cylinder direct-coupled drive wheeled tractors - General specifications
- GB/T 19408.5-2009Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 5: Dimensions of ball-type coupling device
- GB/T 24655-2009Agricultural tractors -- Remote control hydraulic cylinders for trailed implements
How to Download GB/T 1592.2-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1592.1-2016 — Agricultural tractors -- Rear-mounted power take-off types 1, 2, 3 and 4 -- Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone
GB/T 17126.2-2009 — Agricultural tractors and machinery -- Power take-off drive shafts and power-input connection -- Part 2: Specification for use of PTO drive shaft, and position and clearance of PTO drive line and PIC for various attachments
GB/T 19408.1-2003 — Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 1: Dimensions of hitch-hooks
GB/T 1592.2-2016
$85.00