GB/T 15092.1-2020Switches for appliances - Part 1: General requirements (English PDF)

National Standard of the People's Republic of China

ICS

29.120.40

Classification

K64

Issued by: State Administration for Market Regulation, China National Standardization Administration

Contents

• 1 Scope
• 2 Normative references
• 3 Terms and Definitions
• 5 General precautions for testing
• 8 Signs and documents
• 9 Protection against electric shock
• 10 Grounding device
• 11 Terminals and terminals
• 12 Structure
• 14 Protection against solid foreign objects, water and moisture
• 15 Insulation resistance and dielectric strength
• 16 Fever
• 17 Durability46
• 18 Mechanical strength
• 19 Screws, current carriers and couplings
• 21 Fire hazard
• 23 Abnormal operation and fault conditions of switches
• 25 Electromagnetic compatibility (EMC) requirements
• 1 Scope
• 2 Normative references
• 3.2.8 Over-voltage over-voltage
• 3.2.9 Over-voltage category over-voltage
• 3.2.10 Impulse withstand voltage impulse
• 3.2.11 Minimum load minimum
• 3.2.12 Equivalent heating current thermal
• 3.3 Terms and definitions for different types of switches
• 3.3.1 Attached switch incorporated
• 3.3.7 Pull switch cord-operated
• 3.3.8 Push-pull switch push-pul
• 3.3.9 Automatic reset switch biased
• 3.4 Terms and definitions for switching operation
• 3.4.2 Indirect drive indirect
• 3.4.4 Transmission mechanism actuating
• 3.4.6 Micro disconnect micro-disconnection
• 3.4.8 Completely disconnect ful-disconnection
• 3.4.9 Single-phase all-pole disconnection al-pole
• 3.4.11 Electronic actuator electronic
• 3.4.13 Abnormal situation abnormal
• 3.5 Terms and definitions for switch connections
• 3.5.1 External conductorexternal
• 3.5.2 Built-in conductor integrated
• 3.6 Terms and Definitions for Terminals and Ends
• 3.6.3 Post terminal pilar
• 3.6.7 Lug terminal lug
• 3.6.8 Sleeve type (shroud type) terminal mantle
• 3.6.11 Flat quick-connect terminal flat
• 3.6.12 Insert tab
• 3.6.13 Socket female
• 3.6.14 Solder terminal solder
• 3.7 Terms and definitions for insulation
• 3.7.2 Additional insulation supplementary
• 3.7.3 Double insulation double
• 3.7.4 Reinforced insulation reinforced
• 3.7.6 Coating layer coating
• 3.7.8 Class 0 appliance class
• 3.7.9 Class Ⅰ appliance class
• 3.7.10 Class Ⅱ appliance class
• 3.7.11 Class Ⅲ appliance class
• 3.7.12 Relative tracking index comparative
• 3.8 Terms and definitions related to pollution
• 3.8.3 Macro environment macro-environment
• 3.8.4 Pollution level polution
• 3.9 Terms and definitions related to the manufacturer's test
• 3.9.2 Sampling test sampling
• 3.9.3 Type test type
• 5 General precautions for testing
• 5.1 Tests required by this clause
• 5.1.7 Switches with non-detachable leads are tested with the leads connected.
• 5.1.8 If the switch has inserts, proceed to Chapter 16 (this Part) and Chapter 17 (GB/T
• 5.2 Electrical Precautions