GB/T 10597-2022Hoisting hoister (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

This document replaces GB/T 10597-2011 "Winding Hoist", compared with GB/T 10597-2011, except for structural adjustment and editing

In addition to the sexual changes, the main technical changes are as follows.

a) terms and definitions have been changed (see Chapter 3, Chapter 3 of the.2011 edition);

b) Change the hoist from the original singleness to the diversity (see Chapter 4, Chapter 4 of the.2011 edition);

c) On the basis of the original single-speed hoist hoist, a multi-speed hoist hoist is added (see 4.3);

d) The schematic diagram of the gantry hoist and the basic parameters of the gantry hoist are added [see Figure 4c) and Table 7];

e) Change the opening and closing speed of the hoist to be divided according to the operating period (see Chapter 5, Chapter 5 of the.2011 edition);

f) Increased the hoisting capacity of the hoist (see Chapter 5);

g) The power supply requirements in the working environment conditions of the hoist are added (see 6.1.1);

h) The performance requirements for the braking system of the hoisting mechanism of the hoist are changed (see 6.3.2, 6.3.2 of the.2011 edition);

i) Added the requirements for the hoist safety monitoring and management system (see 6.3.17);

j) Added requirements for static load test (see 6.3.19) and dynamic load test (see 6.3.20) of hoists;

k) Changed the requirements for the reel in the main parts of the hoist (see 6.4.5, 6.4.5.1 of the.2011 edition);

l) The connection requirements for the main components of the hoist are added (see 6.5);

m) Added the requirements for the electrical equipment system of the hoist (see 6.7.1), the hydraulic station of the hydraulic grabbing beam and the relevant requirements for its electric control equipment (see 6.7.7);

n) Changed the test method (see Chapter 7, Chapter 7 of the.2011 edition), inspection rules (see Chapter 8, Chapter 8 of the.2011 edition).

Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.

1 Scope

This document specifies the type, basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of hoisting hoists.

This document is applicable to the fixed or closed gates and trash racks of water conservancy and hydropower projects, which are mainly driven by electric power and adopt wire rope hoisting method.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations

documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 699 High Quality Carbon Structural Steel

GB/T 755 Rotating Electric Motor Rating and Performance

GB/T 1176 Cast copper and copper alloys

GB/T 1184 shape and position tolerances do not note tolerance values

GB/T 1228 High-strength hexagon head bolts for steel structures

GB/T 1229 High-strength hex nuts for steel structures

GB/T 1230 High-strength washers for steel structures

GB/T 1231 Technical Specifications for High Strength Large Hexagon Head Bolts, Large Hexagon Nuts and Washers for Steel Structures

GB/T 1804 General Tolerances Unmarked Tolerances of Linear and Angular Dimensions

GB/T 3181 Paint Film Color Standard

GB/T 3323.1 Nondestructive testing of welds - Radiographic testing - Part 1: Film technology for X and gamma rays

GB/T 3478.1 Cylindrical spur involute splines (metric module flank fit) Part 1: General

GB/T 3632 Torsional shear type high-strength bolt connection pair for steel structure

GB/T 3811-2008 Crane Design Specification

GB/T 4323 elastic sleeve pin coupling

GB/T 5226.32 Mechanical and Electrical Safety Mechanical and Electrical Equipment Part 32: Technical Requirements for Hoisting Machinery