GB/T 10499-2014Test methods of sugar cane (English PDF)
糖料甘蔗试验方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 10499-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
February 1, 2015
Scope
GB/T 10499-2014 is the English-translated version of 糖料甘蔗试验方法.
GB/T 10499-2014 is the Chinese standard "Test methods of sugar cane". Its scope clause reads: This standard specifies the test methods related to sugar cane quality indicators.
Acquisitions and cane sugar cane This standard applies to the analysis of test quality indicators. Its clauses include sampling.
Found what you need?
Document preview — GB/T 10499-2014
National Standard of the People's Republic of China
- ICS
- 65.020
- Classification
- B 34
- Replacing
- GB/T 10499-1989
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Sampling
- 4 Test Method
- 5 10 pilot projects Calculation
- Appendix A (normative) Determination of refractive Brix
- Appendix B (normative) observation sugar brix temperature correction table (standard temperature 20 °C)
- Annex C (normative) sugar brix, depending on the density of the table
- Annex D (normative) refractive sugar brix temperature correction table (standard temperature 20 °C)
1 Scope
This standard specifies the test methods related to sugar cane quality indicators.
Acquisitions and cane sugar cane This standard applies to the analysis of test quality indicators.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Laboratory use specifications and test methods GB/T 6682 Analysis
3 Sampling
Cane unloading station or unloading station and a random position cane cane crushing devices (or by the settlement agreed by the parties position), on behalf of each sample has
Table of sugarcane in duplicate in at least 10kg, one for determining the inclusion, quality indicators measured cane after another small press for the press, or
Purchase and sale agreement by the parties specifically agreed.
Test Method 4
Unless otherwise indicated in the analysis using only analytical grade reagents and GB/T 6682 set forth in the water.
4.1 Determination of inclusions
4.1.1 Method summary
Weigh sugar cane and adhesion and solids mixed thereon, calculated inclusion rate of sugar cane.
4.1.2 instruments and equipment
4.1.2.1 Scales
weighing 20kg, a sense of volume 10g.
4.1.2.2 Industrial balance
weighing 2000g, a sense of the amount of 0.1g.
4.1.3 Step
The sample is about 10kg lighter cane placed on the weighing scales, and then attached to the cane leaves sugarcane on sugarcane shoots, roots, silt, dead stems and other folders
Debris peeled, collected in a receptacle, with industrial weighing scales, accurate to 0.1g.
4.1.4
Calculation and results are shown
Inclusion rate sugar cane by the formula (1) calculated value is expressed in% calculated results to two decimal places.
T =
W1 ×
100 (1) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 10499
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 10499-2014 | Test methods of sugar cane | current edition | Current |
| GB/T 10499-1989 | Test methods of sugar cane | previous edition | Superseded |
This page sells the current edition, GB/T 10499-2014. Earlier editions are listed for reference only.
How to Download GB/T 10499-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 10499-2014
$345.00