GB 9053-2013Natural gasoline (English PDF)

Foreword

Chapter 5 of this standard (except for test method), Chapter 7, Chapter 8 is mandatory, the rest are recommended.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard replaces GB 9053-1998 "stable light hydrocarbon", compared with GB 9053-1998, the main technical changes are as follows.

--- Increased content Home's "Warning";

--- Normative reference documents removed from the standard version's number (see Chapter 2, Section 2 of the 1998 edition);

--- Increasing the "GB/T 17040" in the normative references, "SH/T 0689", "SH0164" and "GB 12268" (see paragraph 2 chapter);

--- Table 1 "1) Winter means September 1 to February 29, the second day" was changed to "a summer from May 1 to October 31 Day "and" b winter from November 1 to April 30, "(see Chapter 5);

--- Increase in Table 1, "c allows the use of sulfur content GB/T 17040 and SH/T 0253 were measured, but the referee test should be used SH/T 0689 "(see Chapter 5);

--- Delete the contents of the relevant inspection rules (see Chapter 6, Section 6 of the 1998 edition);

--- The "mark of the product and storage in accordance with Appendix A (normative) implementation of the provisions" to "mark of the standard product, packaging, Transport and storage and delivery acceptance SH0164 execution "(see Chapter 7, Chapter 7, 1998 edition);

--- Delete the contents of agreements and contracts related to both supply and demand (see the 1998 edition of Chapter 8);

--- Increased security-related content (see Chapter 8);

--- Deleted Appendix A (see 1998 edition of Appendix A).

1 Scope

This standard specifies the terms and definitions stable light hydrocarbon, product classification, technical requirements, test methods, sampling, marking, packaging, transportation and storage Keep safe.

This standard applies to oil and gas fields and stable light hydrocarbon products.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3555 Petroleum products - Determination of Saybolt color (Saybolt colorimeter method) (GB/T 3555-1992, ASTM D156- 1987, eqv)

GB/T 5096 petroleum products copper corrosion test method (GB/T 5096-1985 (1991), ASTM D130-1983, eqv)

GB/T 6536 Petroleum products - Determination of distillation characteristics at atmospheric pressure (GB/T 6536-2010, ASTM D86-2007a, MOD)

GB/T 8017 Petroleum products - Determination of Reid vapor pressure method

GB 12268 of dangerous goods

GB/T 17040 Petroleum and petroleum products Determination of sulfur content - Energy Dispersive X-ray Fluorescence Spectrometry (GB/T 17040-2008, ASTM D4294-2003, MOD)

SH0164 petroleum product packaging, storage and delivery acceptance rules

SH/T 0253 light petroleum products - Determination of total sulfur (power law) (SH/T 0253-1992, ASTM D3120- 1982, NEQ)

SH/T 0689 and light hydrocarbon fuel and other oil products - Determination of total sulfur (UV fluorescence) (SH/T 0689- 2000, ASTM D5453-1993, eqv)

SY/T 0543 sampling method stable light hydrocarbon

3 Terms and Definitions

The following terms and definitions apply to this document.