GB 7956.14-2015Fire fighting vehicles - Part 14: Rescue fire fighting vehicle (English PDF)

4.2 Vehicle Requirements Section

4.2.1 shall rescue vehicle chassis, vehicle crane or truck-mounted forklift having a lifting function, a winch, a lighting system, etc., and attendant Equipped with rescue equipment, with lifting, pulling, lighting and other functions.

4.2.2 Fuel tank capacity rescue vehicles should ensure that fire trucks can be done after traveling 100km truck mounted crane 50 work cycles.

4.2.3 The number of rescue vehicle occupant should be 6 to 12 people.

4.2.4 Crane operation indication should be provided at the boom truck-mounted hydraulic system pressure gauge. When the winch is a hydraulic winch, which should Indication is provided at the winch operation a hydraulic system operating pressure gauge.

4.2.5 conspicuously located close to the hydraulic oil tank to be provided to inform the user of the hydraulic oil grade, temperature range, with a capacity, and the replacement cycle more The hydraulic oil change should pay attention to signs matters. Means for indicating the hydraulic tank and the hydraulic fluid level inside the temperature should be set.

4.2.6 should be visible at the operator to set the text or illustrations or truck-mounted forklift truck mounted crane, winch and lighting system, said instructions and warnings Bright. Instructions and warning instructions should be distinguished from the use of different colors or different font sizes. For operation may cause serious consequences As should have warning signs, the color of warning signs should be consistent with GB 15052-2010 Chapter 9, the font size should be clear that the operator read.

4.3 Chassis restructuring requirements Rescue vehicle chassis reform should meet the requirements of

5.4 GB 7956.1-2014.

4.4 special apparatus requirements

4.4 dedicated device in claim

4.4.1 Crane

4.4.1.1 General requirements 4.4.1.1.1 When the vehicle running state, Crane slewing sections should occur relative rotation, the arm and the leg can be fixed, firmly locked. 4.4.1.1.2 Crane maximum rated lifting load of not less than 3000kg. 4.4.1.1.3 Crane maximum working range of not less than 7m, since the amplitude of the rated lifting load of not less than 800kg. 4.4.1.1.4 sides Crane control device shall be provided with leg and the boom, and the operation should be the same on both sides. 4.4.1.1.5 truck mounted crane head protruding parts, hook, legs and other activities, should be brushing warning signs, warning signs should be consistent color GB 15052-2010 provisions of Chapter 9. 4.4.1.1.6 feature Crane winch mechanism, the winding mechanism on the cable or wire to be provided means to ensure the wire rope in order. 4.4.1.1.7 shall be provided Crane operator visible in the product label, the product label should include at least the manufacturer's name, product name and type Number, rated from load and corresponding amplitude etc., a holder for signage should meet the requirements of

5.6.1 in GB 7956.1-2014.

4.4.1.2 lifting capacity requirements Crane hoist should be at the minimum amplitude of the maximum rated working load lifting, lifting the corresponding rated at the maximum working range lifting carrier Netherlands. During the boom lifting operation should be smooth, accurate, no crawling, chattering and other anomalies, the turning mechanism when the rotary movement, start, rotation, Braking should be stable and reliable. Crane anomalies various components should not be permanent damage or deformation.

4.4.1.3 stability requirements Crane at the maximum working range for the weight lifting load corresponding to

1.1 times the rated lifting hoists, for rotation within the working range, car Vehicles should remain stable, the side opposite to the direction of orientation of the boom outermost edge of the leg bend amount should not exceed 60mm, and should not appear from the tire To the phenomenon.

4.4.1.4 reliability requirements Crane continuous duty cycle 50 times, action should be smooth, accurate, non crawl, flutter, card issuers and other anomalies, there should be no oil spills, machine And other anomalies is damaged or malfunction.

4.4.2 Winch

4.4.2.1 General requirements 4.4.2.1.1 mounted on the vehicle's winch and wire rope inspection and maintenance should be easy, should not be retractable rope to itself and other nearby Equipment damage, installation should not affect the front bumper winch in the end plate using a trailer hook. When 4.4.2.1.2 winch mounted under the frame or wire rope winch through under the frame, measures should have mud splashed defense. Winch rating pulling 4.4.2.1.3 laden mass not greater than 10t of rescue vehicles configuration of not less than 50kN, loaded with a mass greater than 10t Winch rating pulling the rescue vehicle configuration is not less than 70kN. 4.4.2.1.4 rope winch effective working length not less than 30m. 4.4.2.1.5 a rope winch rope deflector should, a rope winch rope pitch angle -5 ° ~ 5 °, left angle It should be able to reach the rated tension within the range of -10 ° ~ 10 °. 4.4.2.1.6 winch cable should be automatic function to ensure the closing winch, rope put rope during the chaos phenomenon does not occur. 4.4.2.1.7 winch brake should be reliable and should not slip at rated tension. 4.4.2.1.8 rope winding layers on the reel should not exceed five layers. 4.4.2.1.9 Chinese products should be equipped with a winch operator visible signs in place, the product label should include at least the manufacturer's name, product name and Type, rated winch tension, the diameter and the effective working length of wire rope, rope and the like to allow the contents of the operating angle, the fixed plate should meet GB 7956.1-2014 requirements in 5.6.1.

4.4.2.2 Security requirements 4.4.2.2.1 winch overload protection device should be, and should meet the following requirements.

--- working tension overload protection device shall be rated winch tension between

--- overload protection device to automatically stop working when the strand job; After releasing

--- overload condition, the overload protection device should be able to reset itself and the winch brace or bracket connected to the vehicle body must not be broken Or permanent deformation phenomenon. 4.4.2.2.2 winch position control device should be able to guarantee the safety of the operator, and is easy to observe the operation situation of the winch.

4.4.2.3 reliability requirements Winch continuous work cycle 50 times, the work should be stable and reliable, should not be less than the rated tension, brake slip, rope breaks And other anomalies or malfunctions.

4.4.3 Lighting System

4.4.3.1 General requirements 4.4.3.1.1 rescue vehicle lighting system configuration should meet the requirements of GB 26755-2011. 4.4.3.1.2 rescue vehicle lighting system generator (group) rated power of not less than 8kW. 4.4.3.1.3 lighting illuminance should be maximized within the generator (s) started successfully 15min. (Group) is not greater than the operating noise generator 4.4.3.1.4 90dB (A). 4.4.3.1.5 illumination system at each test point 50m illumination are not less than 5lx. 4.4.3.1.6 lights operating range and operating time should meet the requirements in Table 1. Table 1 lighting operation time and the operating range Ground Clearance Rise Time Fall Time Horizontal rotation angle (°) The level of turnaround time angle of depression (°) Elevation (°) Pitch time >=6 <=120 <=120 360 <=50 <=-90 >=90 <= 50

Note 1. The maximum rise height above ground lifting device refers to the illumination center position of the lamp to floor.

Note 2. a horizontal turnaround time refers to the horizontal angle of rotation from clockwise to the maximum angle of 0 ° counterclockwise to the maximum angle and then, 0 ° clockwise to the final The time required.

Note 3. go to the pitch time refers to the maximum pitch angle from the horizontal angle of 0 ° up and then go down a maximum angle, 0 ° to the horizontal upwardly and finally the desired time. 4.4.3.1.7 lifting bars after the illumination system reaches the maximum height, 1h decline in the amount of not more than 6cm. 4.4.3.1.8 control cabinet switching means should reliably embodiments generator (s) or foreign power supply switching transmission to each other. 4.4.3.1.9 phase sequence control cabinet wires arranged in GB 50149-2010 should meet the requirements of 3.1.9, the wire should be consistent with the color of GB 50149- 2010

3.1.10 requirements. 4.4.3.1.10 respective electrical control cabinet measuring instrument accuracy class not less than 2.5. Control cabinet should have at least the following control functions and Display.

--- power switch, to start, stop, emergency shut off, running lights;

--- voltage, current, frequency display. 4.4.3.1.11 lighting system should be set to the product label, the product label content shall meet the provisions of GB 26755-2011 in 8.1, but also Shall include a lighting lamp power rating, the maximum lift height of the lift rod, the lift rod drive type, a holder for signage should meet GB 7956.1-2014 In

5.6.1 requirements.

4.4.3.2 Safety Requirements 4.4.3.2.1 illumination system should be provided with short circuit protection, overload protection and grounding. And the insulation resistance between the power supply terminals and ground terminals of the external charging not less than the illumination system housing 4.4.3.2.2 100MOmega. 1500V subjected to compressive strength test between the live terminal and the external casing 4.4.3.2.3 lighting system, breakdown or not flicker occurs phenomenon. 4.4.3.2.4 lighting required protection level not less than a predetermined 4208-2008 GB of IP55 control cabinet low level of protection not To IP2X requirements.

4.4.3.3 reliability requirements 4.4.3.3.1 turn on the lighting system, the generator (set), lighting 12h continuous operation at rated conditions, the lighting system should be working properly, No anomalies. 4.4.3.3.2 illumination system 300 continuously operating cycle, the lifting device, turning the tilt mechanism should work, without damage, jamming or other foreign Often phenomenon.

4.4.4 Truck-mounted forklifts

4.4.4.1 truck-mounted forklift rated lifting capacity of not less than 2500kg.

4.4.4.2 lorry truck and the vehicle body is fixed to be double secured, one after the failure is fixed, the truck and the vehicle body can still ensure the truck-mounted solid Fixed firmly.

4.4.4.3 forklift truck-mounted vehicle body bonding time should be less than 5min, departing time should be less than 3min, in conjunction with or disengaged during, and should not be Body interference phenomenon occurs.

4.4.4.4 forklift truck-mounted to the vehicle body at a connection state, the power performance of the vehicle, through the performance, braking performance, axle load and quality parameters, safety Shall comply with the relevant provisions of GB 7956.1-2014 of.

4.4.4.5 truck-mounted forklifts should be set to the product label, the product label should include at least the manufacturer's name, product name and model number, nominal weight, etc. Fixed content, signs shall meet the requirements in

5.6.1 of GB 7956.1-2014.

4.5 Instrumentation requirements Rescue vehicle equipment, instruments should be consistent with GB 7956.1-2014 in 5.6.

4.6 equipment placed, and with fixed

4.6.1 rescue vehicles and stationary equipment should be placed in line with the provisions of GB 7956.1-2014

4.6.2 rescue vehicle equipped with the equipment specified in accordance with Table 2. Table 2 rescue vehicles equipped with equipment table Category No. Name Unit Quantity The total mass loaded kg <=18000 > 18000 Remark personal Protection class Fire-air exhalation pressure Haustorium With 1/sqrt sqrt standby person SCBA cylinder 6 2 a wearable an explosion-proof lighting/person sqrt sqrt 3 firefighters HuJiuQi a 1/sqrt sqrt person with orientation lamp function 4 fire a sub goggles/person * * 5 rescue helmet top 1/person * * 6 rescue gloves deputy 2/person * * 7 rescue service set 1 set/person * * 8 rescue boots one pair of double/person * * 9 two sets of chemical protective clothing 2 sqrt sqrt 10 a chemical protective suit jacket 1 * * undertake chemical fire station equipped rescue mission Special grade chemical protective suit sleeve 11 * 1 * Anti-bee suit sleeve 12 * 2 * An electrically insulating harness sleeve 13 * 1 * 14 anti-static clothing sets 2 sqrt sqrt 15 anti-high temperature gloves vice 2 sqrt sqrt 16 chemical gloves vice 2 sqrt sqrt General fire safety rope 17 root 2 sqrt sqrt

18 Fire safety harness root 2 sqrt sqrt Fire auxiliary anti-fall member 19 sleeve 2 sqrt sqrt The mobile gas supply source 20 sets 1 * sqrt twenty one Positive pressure oxygen fire call Haustorium With 2 * * A forced air breathing apparatus sleeve 22 * 1 * twenty three Fire filtering of comprehensive prevention Poison mask * * 3 sets 24 diving apparatus set 2 * * undertake rescue missions waters of the firehouse with 25 fire special life jacket sleeve 3 * * undertake rescue missions waters of the firehouse with Portable strong light illumination 26 only 3 sqrt sqrt 27 firefighters cooling vest pieces 2 sqrt sqrt Fire light sticks 28 with root 20 sqrt sqrt 29 skull vibrating a communication device 2 sqrt sqrt 30 explosion-proof handheld radio a 2 sqrt sqrt Individual sets of firemen positioning means 31 1 * * TABLE 2 (cont.) Category No. Name Unit Quantity The total mass loaded kg <=18000 > 18000 Remark Prosecution and class Toxic gas detector 32 sets 1 sqrt sqrt Combustible gas detector 33 sets 1 sqrt sqrt Fire station 34 with the infrared camera 1 sqrt sqrt A leakage detector 35 * 1 * Thermometer 36 a 1 sqrt sqrt Electronic instrument meteorological sleeve 37 * 1 * 38 life detector units * 1 * A laser range finder 1 * 39 * Portable dangerous chemicals seized Test pieces * * 2 sets Electronic pH tester sleeve 41 * 1 * Alert category Warning sign posts root 42 * 10 * Tapered root accident flag column 43 * 10 *

44 Isolation warning reel 10 sqrt sqrt 45 entrance signs * * Group 2 46 kinds of warning signs set 1 sqrt sqrt 47 a flashing warning lamp 2 sqrt sqrt 48 hand-held microphone a 2 * * Lifesaving class Fixing the airbag cover body 49 1 * * Fixing the airbag cover body 50 1 * * 51 life-saving lighting reel 2 sqrt sqrt Folding stretcher 52 sub * 1 * 53 multi-functional stretcher vice 1 sqrt sqrt Fire rescue cushion sleeve 54 * 1 * 55 life-saving relief to drop a 3 sqrt sqrt 56 a pharmaceutical aid kit 1 sqrt sqrt Fire filter self call Haustorium With 10 sqrt sqrt 58 wounded fixed lift plate 2 * * The medical simple respirator station 1 59 * * 60 pneumatic lifting cushion cover 1 sqrt sqrt

61 Rescue stent 1 sqrt sqrt Fluorescent paint from the spray cans 62 * 10 * TABLE 2 (cont.) Category No. Name Unit Quantity The total mass loaded kg <=18000 > 18000 Remark Lifesaving class 63 metal extension ladder to 1 * * Article 64 lifesaving rope 2 sqrt sqrt 65 rescue ladder with 1 * * Lifesaving dumped sheath 66 * 1 * The inverter power stage 67 1 * * power should match actual needs 68 body bags grabbing 10-* * Rescue class Hydraulic pressure Rescue tool Mobile hydraulic pump station 1 sqrt sqrt motor output are dual-bis Manual hydraulic pump station 1 sqrt sqrt The hydraulic cutter 1 sqrt sqrt Hydraulic spreader to 1 sqrt sqrt Hydraulic shear expansion device to 1 sqrt sqrt Hydraulic hold the top group 1 sqrt sqrt Rescue hand tool set 70 1 sqrt sqrt 71 toothless saw table 1 sqrt sqrt 72 motor chain saw table 1 sqrt sqrt Pneumatic cutting knife 73 * 1 * Multifunctional tool sleeve 2 * 74 * Concrete hydraulic rescue workers With group Set 1 * * 76 1 * * hydraulic jack having maximum lifting capacity of not less than 20t Portable security door ripper Tool Set Sets 1 sqrt sqrt 78 destroyed lock sheath 1 sqrt sqrt 79 sets the multifunction Naogou 1 sqrt sqrt Insulation cutting pliers 80 to 1 sqrt sqrt Handheld 81 reinforced speed breaker units * 1 * The electric shear expansion pliers 82 * 1 * Hydraulic universal cutting pliers station 83 1 * * 84 different wheel saw to cut a 1 * * Heavy support sleeve sheath 85 * 1 * 86 impact drill floor * 1 * Rock drill machine 1 * 87 * TABLE 2 (cont.) Category No. Name Unit Quantity The total mass loaded kg <=18000 > 18000 Remark Plugging class 88 plugging wooden wedge sets 1 * sqrt not less than 28 per set of specifications Sealing bags bundled sleeve 89 * 1 * Plugging the metal sleeve 90 the sleeve 1 * sqrt each less than 9 specifications Plugging tool 91 injection group containing 1 * sqrt plugging plastic injection tank

1 Paste plugging tool group 92 1 * sqrt Electromagnetic plugging tool sleeve 93 * 1 * Sets of non-sparking tools 94 1 * sqrt not less than 11 kinds of specifications with illumination Smoke class

5.2 Test Vehicle Requirements Composition structure

5.2.1 Visual inspection of rescue vehicles, the test results to determine whether the requirements of 4.2.1.

5.2.2 rescue vehicle stop after traveling 100km at full load, truck mounted crane legs to the maximum span is supported on the ground. The boom back Go positive side of the vehicle, lifting a respective rated from load at maximum working range, the load to the maximum amplitude after becoming operational elevation, drop arm To the horizontal, the horizontal extreme position back to go to the other side, and then go back to place the load lowered to the ground, to complete the operation of a working cycle ring. Continuous work cycle 50 times, the test results to determine whether compliance with the requirements of 4.2.2.

5.2.3 Visually inspect the rescue vehicle occupant compartment of the number of seats to determine whether the test results meet the requirements of 4.2.3.

5.2.4 Operation of the visual inspection and hydraulic lorry crane winch can indicate whether or not the pressure of the hydraulic sys...