GB 26755-2011Fire mobile illuminating device (English PDF)

Foreword

The standard Chapter 5, Chapters 7 and

8.1 are mandatory, the rest are recommended. This standard is based on GB/T 1.1-2009 given rules for writing. Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents. The standard proposed by the People's Republic of China Ministry of Public Security. This standard by the National Standardization Technical Committee appliances Fire Fire accessories Technical Committee (SAC/TC113/SC5) centralized. This standard was drafted. Shanghai Fire Research Institute of Ministry of Public Security. Drafters of this standard. Shen Jian Min, wearing national, Zhu Jiang, Li Rui Kun, Zhang Yan, Zeng Yue Lei. Fire mobile lighting fixtures

1 Scope

GB 26755-2011 is the Chinese national standard on fire mobile illuminating device, in the field of environment and health protection, safety. It carries no /T suffix, which in the Chinese system means compliance is mandatory: a product or a practice within its scope has to meet it to be lawfully made, sold or carried out in China. It was issued on 20 July 2011 by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of China, and has been in force since 1 November 2011. Classification: ICS 13.220.10, CCS C85. This page is published from the official record of the standard held by the Chinese standards administration: the identification, the dates, the classification and the issuing body are taken from there. The clause text, the tables and the numeric limits are in the document itself, which is delivered complete in English translation.

This standard specifies the terms and definitions fire mobile lighting device classification and models, technical requirements, test methods, inspection rules, marking Chi, packaging, transport and storage. This standard applies to portable fire illumination device.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs

GB/T 2423.1 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold

GB/T 2423.2 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat

GB/T 2423.3 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test

GB/T 2423.10 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal)

GB/T 2423.38 Environmental testing for electric and electronic products Part 2. Test methods Test R. Water test method and guidance Determination of sound power levels of noise sources reflecting plane free field engineering method GB/T 3767 sound pressure

GB/T 3785 sound level meter electric, acoustic performance and test methods

GB 4208 housing protection (IP Code)

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Fire mobile lighting fixtures firemobileiluminatingdevice Fire fighting and rescue when used by the illumination system, power supply system, lift system and other components, portable, towing, or by their own means of transport Mobile lighting apparatus.

3.2 Lighting system iluminatingsystem Medallions from the light source and other components, can be automatic or manual rotation, pitching implement a lighting device.

3.3 Power Supply System powersupplysystem AC power supply, generator or battery for the lifting system, lighting system provides a means of electrical energy.

3.4 Lift system take-offandlandingsystem The illumination system can implement a lifting device.

3.5 Duty cycle actioncycle Lift rod lift system having a mobile fire lighting device from an initial position to its highest position and then back to the initial position over Cheng; after lighting the fire mobile device horizontally rotating one week with a swivel, tilt function of the lighting system stoop, Yang process each of 60 °; with a lift And rotary systems, mobile lifting rod fire lighting apparatus pitch function of the lighting system was raised to the highest position, the lighting system of water from the initial position Rotary flat overlooking a week later, Yang each 60 °, the lift rod back to the initial position of the process.

4 Classification and models

4.1 Classification Fire mobile lighting fixtures can be divided into vehicle-mounted lighting device and a mobile fire-board fire fighting mobile lighting fixtures.

4.2 Model Fire mobile lighting device (hereinafter referred to as a lighting device) model preparation should meet the following requirements. YZ Fire mobile lighting fixtures Lighting system type (H expressed swivel, tilt function, no function is omitted) Light total power in kilowatts (kW) - - Lift height in meters (m), without lifting system is omitted Illumination device classification (C represented vehicle type;-board formula omitted) Power supply (F represents powered generators; C indicates battery power; AC power supply is omitted) Enterprise modified code. A, B Example. Model YZH4-7CA expressed swivel, tilt function, sources total power 4kW, lifting height of 7m, AC power supply type A vehicle-mounted shift fire Dynamic lighting fixtures.

5 Technical requirements

5.1 Appearance quality Illuminating surface of the device should be no rust, no coating peeling or blistering, no scratches broken cracks and other mechanical damage, no parts of the fastening Loose.

5.2 Anti-voltage fluctuation performance AC-powered lighting devices in 198V ~ 253V voltage fluctuation range should be able to work properly.

5.3 Insulation resistance The insulation resistance between the illumination device and the chassis external charging terminals and power terminals and ground should be not less than 100MOmega.

6 Test methods

6.1 appearance quality inspection Quality visual appearance of the lighting device.

6.2 anti-voltage fluctuation performance test The accuracy no less than ± 5% AC voltage regulator power supply circuit device is connected to AC power supply lighting device, a lighting device is turned to adjust the cross Flow regulator device so that power supply voltage lighting apparatus are 198V, 220V and 253V, the lighting apparatus work.

6.3 Insulation resistance test With an accuracy not less than ± 5% Insulation resistance meter measuring pressure between the external charging terminals and the chassis and power supply 500V DC Terminals and ground insulation resistance.

6.4 compressive strength test With an accuracy not less than ± 10% compressive strength tester 1500V ± 100V AC power is applied between the external terminals and housing charged Pressure to maintain 1min.

6.5 Reliability Test Power (closed source), operating 100 duty cycle lighting.

6.6 climatic, mechanical aptitude test environment

6.6.1 Low Temperature Test Low temperature test condition of the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.1 performed.

6.6.2 Damp heat test Damp heat test conditions of illumination device in accordance with the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.3 performed.

6.6.3 High-temperature test High temperature test condition of the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.2 performed.

6.6.4 Test rain Test conditions and rain lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.38 performed.

6.6.5 Vibration Test Vibration test conditions the lighting device according to the corresponding provisions in Table 1, the test according to the provisions of GB/T 2423.10 performed.

6.7 Noise test work Acoustic testing environment should comply with GB/T 3767, the sound level meter should meet the requirements of GB/T 3785, and its accuracy class I level. The lighting device according to the normal operating position placed. In rated working voltage power supply, working at full capacity. In the vertical distance illumination device 1m, High sound pressure level measured at 1m, whichever is greater.

6.8 Lifting Time Trial Start lifter, lifter rise and fall times are measured with a stopwatch.

6.9 Limit Performance Test When the lift rod to its maximum height, measured to the top of the lift rod height from the ground and lifting rod is at rest, 1h after the measure height. Calculate the lift rod slipped away.

7 Inspection rules

7.1 Inspection classification Product inspection is divided into type test and factory inspection.