GB 22998-2008Safety of machine tools -- Large numerically controlled turning machines and turning centers (English PDF)
机床安全 大规格数控车床与车削中心
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for GB 22998-2008 in 30 minutes.
Issued by
Standardization Administration of China
Level / Type
National · Mandatory
Issue date
December 31, 2008
Implementation date
October 1, 2009
Scope
GB 22998-2008 is the English-translated version of 机床安全 大规格数控车床与车削中心.
GB 22998-2008 — This Chinese standard specifies the general-purpose CNC lathes and turning centers (hereinafter referred to as the machine) to eliminate hazards and reduce the risk of safety requirements and/or measures.
This standard recognizes the danger see Chapter 4 Table 1. This standard applies to: holding device maximum diameter greater than 500 mm CNC vertical lathes and turning centers, maximum clamping devices or the maximum outside diameter greater than 500 mm from the top����2000 mm CNC horizontal lathes and turning centers.
This standard also applies as an integral part of the machine tool accessories, such as: workpiece, tool, chuck, workpiece, cutting device and chip devices.
This standard also applies to automatic processing lines consisting of lathes or turning unit, when they generate the dangers and risks associated with individual processing machine similar to when.
Given in this standard addition method is based on the criteria listed in references.
Found what you need?
Document preview — GB 22998-2008
National Standard of the People's Republic of China
- ICS
- 25.040.20
- Classification
- J 53
Issued by: Standardization Administration of China
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This Chinese standard specifies the general-purpose CNC lathes and turning centers (hereinafter referred to as the machine) to eliminate hazards and reduce the risk of safety requirements and/or measures. This standard recognizes the danger see Chapter 4 Table 1. This standard applies to: holding device maximum diameter greater than 500 mm CNC vertical lathes and turning centers, maximum clamping devices or the maximum outside diameter greater than 500 mm from the top����2000 mm CNC horizontal lathes and turning centers. This standard also applies as an integral part of the machine tool accessories, such as: workpiece, tool, chuck, workpiece, cutting device and chip devices. This standard also applies to automatic processing lines consisting of lathes or turning unit, when they generate the dangers and risks associated with individual processing machine similar to when. Given in this standard addition method is based on the criteria listed in references. This standard does not apply to the processing of EN 12840
Document data
International classification (ICS): 25.040.20.
Chinese classification (CCS): J53.
Estimated length of the Chinese original: 32,399 words.
Adopted international standard: EN 12478-2000, MOD.
Standards quoted by this document
GB/T 3767-1996; GB/T 3768-1996; GB 4208-2008; GB 5226.1-2002; GB 7247.1-2001; GB/T 8196-2003; GB 12265.1-1997; GB 12265.3-1997; GB/T 15706.1-2007; GB/T 15706.2-2007; GB 15760-2004; GB/T 16404-1996; GB 16754-2008; GB/T 16855.1-2008; GB/T 16856.1-2008; GB/T 17248.5-1999; GB 17888.1-2008; GB 17888.2-2008; GB 17888.3-2008; GB 17888.4-2008; GB/T 18717.1-2002; GB/T 18717.2-2002; GB/T 18831-2002.GB/T 19670-2005; GB/T 19671-2005; ISO/TR 11688-1-1995; ISO 16156-2004; EN 292-2-1991; EN 614-1-1995; EN 614-2-2000; EN 894-1-1997; EN 894-2-1997; EN 894-3-2000; EN 982-1996; EN 983-1996; EN 1005-1-2001; EN 1005-2-2003; EN 1005-3-2002; EN 1005-4-2005; EN 1037-1995; EN 1050-1996; EN 1070-1998; EN 1837-1999; EN 12840-2000; ENV 26385-1990
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3767-1996Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane
- GB/T 3768-1996Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Survey method using an enveloping measurement surface over a reflecting plane
- GB 7247.1-2001Safety of laser products - Part 1: Equipment classification and requirements
- GB/T 8196-2003Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
- GB/T 15706.2-2007Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
- GB 15760-2004Metal cutting machines - General specifications for safeguarding
ISO 3744 · ISO 3746 · GB 4208-2008 · IEC 60529 · GB 5226.1-2002 · IEC 60204 · IEC 60825 · ISO 14120 · GB 12265.1-1997 · GB 12265.3-1997 · GB/T 15706.1-2007 · ISO 12100 · ISO 9614 · GB 16754-2008 · ISO 13850 · ISO 13849 · ISO 14121 · ISO 11202 · ISO 11204 · GB 17888.1-2008 · ISO 14122 · GB 17888.2-2008 · GB 17888.3-2008 · GB 17888.4-2008 · ISO 15534 · ISO 14119 · ISO 14118 · ISO 13851 · ISO 16156
Cited by
- GB/T 23567.3-2018Reliability evaluation for numerical control machine tools—Part 3: Numerically controlled turning machines and turning centres
- JB/T 11562-2013Numerically controlled vertical chucking-turning machines and turning centres - Specifications
- JB/T 4368.1-2013Numerically controlled horizontal turning machines and turning centres - Part 1: Specifications
- GB 22997-2008Safety of machine tools -- Small numerically controlled turning machines and turning centers
How to Download GB 22998-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 23290-2009 — Machine-tools safety -- Safety requirements for the design and construction of work holding chucks
GB/T 15706.2-2007 — Safety of machinery -- Basic concepts, general principles for design -- Part 2: Technical principles
GB/T 16404-1996 — Acoustics. Determination of sound power levels of noise sources using sound intensity. Part 1: Measurement at discrete points
Secure payment via Stripe
Payments accepted
GB 22998-2008
$724.00