Valid

GA 2188-2024Police shoes - Summer boots for immigration police on combat and training (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (32 pages)

Need quotation for your management?

Get a formal quotation for GA 2188-2024 in 30 minutes.

Issued by

Ministry of Public Security

Level / Type

National · Mandatory

Issue date

December 3, 2024

Implementation date

May 1, 2025

Scope

GA 2188-2024 (Police shoes - Summer boots for immigration police on combat and training) is available as an English-translated PDF.

GA 2188-2024 — This document specifies the classification, requirements, test methods, inspection rules, process and post-finishing, transportation and other aspects of summer training boots for police immigration management police. and storage.

This document applies to the production, inspection and ordering of summer training boots for police immigration management police.

Found what you need?

Document preview — GA 2188-2024

National Standard of the People's Republic of China

ICS: 61.060
Classification: A 94

Issued by: Ministry of Public Security

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Categories
5 Requirement
5.1 Structure and style
5.2 Shoe size specification
5.3 Specifications and uses of main materials
5.4 Sensory quality
5.5 Identification
5.6 Packaging
5.7 Physical properties of finished shoes
6 Test methods
6.1 Structure and style inspection
6.2 Shoe size inspection
6.3 Main material inspection
6.4 Sensory quality inspection
6.5 Marking inspection
6.6 Packaging Inspection
6.7 Physical performance test of finished shoes
7 Inspection Rules
7.1 Inspection categories
7.2 Type inspection
7.3 Delivery Inspection
7.4 Defect Classification
7.5 Batching and sampling
7.6 Qualification determination
8 Process and post-finishing
8.1 Key processing equipment
8.2 Cut
8.3 Edge
8.4 Gang Building
8.5 Sole making
8.6 Post-finishing
9 Transportation and storage
9.1 Transportation
9.2 Storage
Appendix A (Normative) Technical requirements for shoe last dimensions
A.1 Shoe last size
A.2 Requirement
Appendix B (Normative) Technical requirements for full-grain yellow cattle upper leather
B.1 Materials
B.2 Physical and chemical properties
B.3 Limits of Hazardous Substances
B.4 Appearance quality
Appendix C (Normative) Technical requirements for polyester filament composite upper fabric
C.1 Material specifications
C.2 Physical properties
C.3 Appearance quality
Appendix D (Normative) Technical requirements for polyester warp knitted spacer mesh fabric
D.1 Material specifications
D.2 Physical properties
D.3 Appearance quality
Appendix E (Normative) Technical requirements for microfiber suede synthetic leather
E.1 Material specifications
E.2 Physical properties
E.3 Appearance quality
Appendix F (Normative) Technical requirements for molded inner pads
F.1 Structure and Style
F.2 Size
F.3 Physical properties
F.4 Appearance quality
Appendix G (Normative) Technical requirements for soles
G.1 Color and style
G.2 Materials
G.3 Physical properties
G.4 Test method for hydrolysis resistance
Appendix H (Normative) Technical requirements for polyurethane foam heel filling
H.1 Physical properties
H.2 Size
Appendix I (Normative) Packaging Technical Requirements
I.1 Packaging material requirements
I.2 Inner packaging
I.3 Outer packaging
Appendix J (Informative) Key Processing Equipment

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

1 Scope

This document specifies the classification, requirements, test methods, inspection rules, process and post-finishing, transportation and other aspects of summer training boots for police immigration management police.

and storage.

This document applies to the production, inspection and ordering of summer training boots for police immigration management police.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.

GB/T 250-2008 Textiles - Grey scale for colour fastness tests GB/T 528-2009 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber GB/T 529-2008 Determination of tear strength of vulcanized rubber or thermoplastic rubber (trouser-shaped, right-angled and crescent-shaped test specimens) GB/T 531.1-2008 Test method for indentation hardness of vulcanized rubber or thermoplastic rubber Part 1: Shore hardness tester method (Shore hardness tester Hardness) GB/T 533-2008 Determination of density of vulcanized rubber or thermoplastic rubber GB/T 2828.1 Sampling procedures for inspection by attributes Part 1: Sampling plans for batch inspection based on the acceptance quality limit (AQL) GB/T 2910.24-2009 Quantitative chemical analysis of textiles Part 24: Mixtures of polyester and certain other fibers (Phenol/tetrachloroethane method) GB/T 3294 Shoe last size testing method GB/T 3512-2014 Hot air accelerated aging and heat resistance test for vulcanized rubber or thermoplastic rubber GB/T 3820-1997 Determination of thickness of textiles and textile products GB/T 3903.1-2017 Test method for whole shoes of footwear - Folding resistance GB/T 3903.2-2017 Test method for whole shoe wear resistance GB/T 3903.4-2017 Footwear Test Method Hardness of Whole Shoes GB/T 3903.5-2011 Test methods for whole shoes - Sensory quality GB/T 3917.3-2009 Tear properties of textile fabrics Part 3: Determination of tear strength of trapezoidal test specimens GB/T 3920-2008 Textiles - Tests for colour fastness - Colour fastness to rubbing GB/T 3922-2013 Textiles - Tests for colour fastness - Colour fastness to perspiration GB/T 3923.1-2013 Tensile properties of textile fabrics - Part 1: Determination of breaking strength and elongation at break (Section 1 Sample method) GB/T 4669-2008 Textiles - Determination of mass per unit length and mass per unit area of woven fabrics GB/T 4745-2012 Testing and evaluation of the waterproof performance of textiles - Water dipping method GB/T 6342-1996 Determination of linear dimensions of foamed plastics and rubber GB/T 6543-2008 Single corrugated box and double corrugated box for transport packaging GB/T 8427-2019 Textiles - Tests for colour fastness - Colour fastness to artificial light. Xenon arc fading GB/T 9867-2008 Determination of wear resistance of vulcanized rubber or thermoplastic rubber (rotating roller abrasion machine method)

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 6342-1996

How to Download GA 2188-2024

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.