YY/T 0895-2013Commissioning of radiotherapy treatment planning systems - Testing for typical external beam treatment techniques (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Introduction

Debugging is radiation treatment planning system (RTPS) and radiation treatment planning quality assurance (QA) is the most important part. debugging It includes a test RTPS function to record each dose and dose verification RTPS performance calculation is consistent actually measured.

YY/T 0798-2010 "Radiotherapy Planning System Quality Assurance Guide" provides a RTPS routine quality control (QC) overall Framework, the provisions of the RTPS regular quality assurance procedures for the implementation of quality assurance required content of the test, and gives the test frequencies Suggest. However, the implementation of YY/T 0798-2010 All test items requires a huge amount of work and requires a lot of manpower and equipment Resources.

This standard provides a limited number of test items, allowing users RTPS can be completed within a reasonable period of time, has a better "practical Sex. "These test items specified in this standard should help users avoid treatment planning process serious errors. Without reducing overall Under the premise of a large number of reduced quality assurance testing, to optimize and streamline RTPS RTPS suppliers and user acceptance testing in the RTPS When the test work.

Other content radiotherapy system quality assurance program is not covered by this standard, as well as other radiotherapy techniques, please refer

YY/T 0798-2010 "Radiotherapy Planning System Quality Assurance Guidelines" implementation.

1 Scope

This standard specifies the radiation treatment planning system (hereinafter referred to RTPS) debugging typical test method of external beam radiation therapy.

This standard applies to RTPS before being put into clinical use of external irradiation of high-energy photon beam therapy debugging and testing techniques.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 17857-1999 Medical imaging academic language (radiotherapy, nuclear medicine and radiation dosimetry equipment)

GB/T 18987-2003 Radiotherapy equipment Coordinates, movements and scales Safety requirements for medical electrical equipment YY 0637-2008 Radiation Treatment Planning System Accuracy requirements and test methods YY 0775-2010 long-distance high-energy radiation treatment planning system X (gamma) beam dose calculation

YY/T 0798-2010 quality assurance of radiation treatment planning systems guidelines

3 Terms and Definitions

GB/T 17857-1999, YY 0637-2008 terms and definitions YY/T 0798-2010 defined apply to this document.

4 Clinical commissioning tests