Valid

YY/T 0734.3-2018Washer-disinfector - Part 3: Washer-disinfectors employing thermal disinfection for human waste containers—Requirements and tests (English PDF)

清洗消毒器 第3部分:对人体废弃物容器进行湿热消毒的清洗消毒器 要求和试验

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for YY/T 0734.3-2018 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

December 20, 2018

Implementation date

January 1, 2020

Scope

YY/T 0734.3-2018 is the English-translated version of 清洗消毒器 第3部分:对人体废弃物容器进行湿热消毒的清洗消毒器 要求和试验.

YY/T 0734.3-2018 is the Chinese pharmaceutical industry standard for washer-disinfectors that empty, rinse, clean and thermally disinfect containers of human waste in a single cycle, the bedpan washers.

It is the third part of the YY/T 0734 series and applies together with the general requirements of part 1, setting the particular requirements and tests: the emptying and rinsing, the cleaning performance, the disinfection expressed as an A0 value, the load carriers for bedpans and urine bottles, and the protection of the room against aerosol and odour. Issued on 20 December 2018, it has applied since 1 January 2020.

Found what you need?

Document preview — YY/T 0734.3-2018

National Standard of the People's Republic of China

ICS
11.080.10
Classification
C 47
Replacing
YY/T 0734.3-2009

Issued by: National Medical Products Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Requirements
  • 5 Test method
  • 6 signs and instructions
  • 7 Packaging, transportation and storage
  • Appendix A (informative) Structural changes in this section compared to ISO 15883-3:2006
  • Appendix B (informative) The technical differences between this part and ISO 15883-3:2006 and their causes
  • Appendix C (Normative Appendix) Toilet paper for testing
  • Appendix D (Normative Appendix) Measuring the water absorption of toilet paper by the test basket method

Foreword

YY/T 0734 "Cleaning and Disinfecting Device" consists of the following five parts.

--- Part 1. General requirements and tests;

--- Part 2. Requirements and tests for disinfection and disinfection of surgical and anesthesia equipment, etc.

--- Part 3. Requirements and tests for cleaning and sterilizing equipment for wet heat disinfection of human waste containers;

--- Part 4. Requirements and tests for cleaning and sterilizing devices for non-invasive medical devices;

--- Part 5. Requirements and tests for chemical disinfection of non-invasive medical devices such as non-invasive. This part is the third part of YY/T 0734.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This section replaces YY/T 0734.3-2009, compared with YY/T 0734.3-2009, except for editorial changes, major technical changes as follows.

--- Modified YY/T 0734.1---2018 does not apply to the provisions of this section (see 4.1.1, 4.1.1 of the 2009 edition);

--- Revised the preset range of disinfection temperature and time during processing (see 4.8.2, 4.8.2 of the 2009 edition);

--- Removed the "inspection rules" (see Chapter 6 of the 2009 edition);

--- Revised the nature of Appendix B, modified from a informative appendix to a normative appendix (see Appendix D, Appendix B of the 2009 edition).

This section uses the redrafting method to modify the use of ISO 15883-3:2006 "cleaning sterilizer part 3. into the human waste container Cleaning and sterilizer requirements and test methods for wet heat sterilization.

This section has more structural adjustments than ISO 15883-3:2006. This section and ISO 15883-3 are listed in Appendix A. The list of chapter numbers in 2006 is a checklist.

There are technical differences in this section compared to ISO 15883-3:2006, and the terms involved in these differences have been passed on the outer margins of the margins.

The vertical single line (|) is marked, and a list of the corresponding technical differences and their causes is given in Appendix B. This section also made the following editorial changes.

--- Removed Appendix A of ISO 15883-3:2006.

1 Scope

This part of YY/T 0734 specifies the use of a single duty cycle to empty, rinse, clean and wet human waste containers. Special requirements for heat sterilized cleaning sterilizers.

This section requires a combination with the general requirements specified in YY/T 0734.1-2018.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

YY/T 0734.1-2018 Washing and sterilizing machines - Part 1. General requirements and tests (ISO 15883-1:2006, MOD)

3 Terms and definitions

The terms and definitions defined in YY/T 0734.1-2018 apply to this document.

4 Requirements

4.1 Overview

4.1.1 4.5.2, 4.14.4, 4.14.5, 4.14.6, 4.15, 4.16 in YY/T 0734.1-2018 shall not apply to this part.

4.1.2 The cleaning sterilizer shall be capable of handling one or more human waste containers and their supports.

4.1.3 The cleaning sterilizer shall be capable of handling one or more human waste containers per operating cycle.

4.1.4 The temperature of the load surface during the disinfection phase should not be lower than the disinfection temperature.

4.2 Chemical metering system

4.2.1 If necessary, a chemical metering system can be installed, which can be filled with detergents, detergents and/or rinses.

4.2.2 The amount of chemical injection should be adjustable, and the accuracy of the set amount should be within ±10%.

4.2.3 The cleaning and sterilizing device should be able to indicate the failure when the chemical injection amount is insufficient, or the operator can visually check the use of the chemical agent. Happening.

4.3 Clear

4.3.1 The manufacturer shall specify that the purchaser needs to manually empty the container or empty the container automatically.

Note. Avoid emptying the container as much as possible.

4.3.2 When the container is automatically emptied, the system should be emptied to ensure that the contents of the container and the contents of the suspension are not empty during emptying. Have to leak.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of YY/T 0734.3

EditionTitleRevisionStatus
YY/T 0734.3-2018Washer-disinfector - Part 3: Washer-disinfectors employing thermal disinfection for human waste containers—Requirements and testscurrent editionCurrent
YY/T 0734.3-2009Washer-disinfector - Part 3: Washer-disinfectors employing thermal disinfection for human waste containers—Requirements and testsprevious editionSuperseded

This page sells the current edition, YY/T 0734.3-2018. Earlier editions are listed for reference only.

How to Download YY/T 0734.3-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YY/T 0734.3-2018

$185.00