YY/T 0628-2020Dentistry—Graphical symbols for dental equipment (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces YY/T 0628-2008 "Dental Equipment Graphic Symbols", compared with YY/T 0628-2008, except for editorial changes The main technical changes are as follows.

---Increase the ISO /IEC registration number (see Table 1~Table 4);

--- Added symbols for cleaning, disinfection and sterilization (see Table 2);

--- Added the symbol of disinfectant for sanitary purposes (see Table 3);

---Added other common symbols (see Table 4).

The translation method used in this standard is equivalent to ISO 9687:2015 Graphical Symbols for Dental Equipment in Dentistry and the one issued in March.2018 Amendment No. 1.The newly added symbols in the 2018 amendment sheet have been marked with a vertical double line (||) on the outer margins.

The Chinese documents that have consistent correspondence with the normatively cited international documents in this standard are as follows.

---GB/T 4880.1-2005 Language Name Code Part 1.2-letter code (ISO 639-1:2002, MOD)

---GB/T 7408-2005 Data element and exchange format information exchange date and time representation (ISO 8601:2000, IDT)

---GB/T 9937 (all parts) oral vocabulary [ISO 1942 (all parts)]

Please note that certain contents of this document may involve patents. The issuing agency of this document is not responsible for identifying these patents.

Introduction

Graphic symbols are used in many fields in daily life. They give necessary and useful information in a variety of visible ways. they As a signal (warning or alarm signal) to provide general information, as a control method to provide the correct application of machines, instruments and other forms of communication.

Graphic symbols are internationally used, eliminating the difficulty of understanding, possible misunderstandings and expensive translation.

SAC/TC221 medical device quality management and related aspects, the standardization technical committee is responsible for the formulation of YY/T 0466.

This standard gives a simplified mark to avoid separate formation of other symbols that may convey the same information.

This standard contains a series of symbols (graphics) used in dentistry, and their application should be regarded as used in dental equipment and dental equipment.

1 Scope

This standard specifies the graphic symbols for dental equipment. These symbols are intended to be used in appropriate parts of dental equipment and accompanying documents for dental equipment Documents, such as instructions for use, markings, labels and product technical documents.

This standard applies to all types of dental equipment. Most of the symbols are taken from relevant ISO, IEC or other international documents, also added Some new symbols provided by manufacturers or users have been added.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated references, the latest version (including all amendments) applies to this document.

YY/T 0466.1-2016 Medical devices used for medical device labeling, marking and information symbols Part 1: General requirements (ISO 15223-1:2012, IDT)

ISO 639-1 Language Name Code Part 1.2-letter code

ISO 1942 Dentistry-Vocabulary

ISO 8601 data element and exchange format information exchange date and time representation

ISO 17724 Graphical Symbol Vocabulary

3 Terms and definitions

The following terms and definitions defined in YY/T 0466.1-2016, ISO 1942 and ISO 17724 apply to this document.

4 Requirements

4.2 Use of graphic symbols These graphic symbols are intended to be used in place of text, such as the use of symbols that appear in the following table on dental equipment and accessory labels Determined by the manufacturer. These symbols can be used on the labels of dental equipment and accessory packaging, on the manufacturer's instructions for use and other similar purposes.