YY/T 0629-2021Dentistry—Central suction source equipment (English PDF)

1 Scope

This standard specifies the classification, requirements, test methods, manufacturer information, marking and packaging of stationary electric central suction source equipment, including

Central amalgam separator and water vapor separator.

This standard also stipulates that the manufacturer provides information on the performance, installation, operation and maintenance of the central suction source equipment as a whole dental pump.

Part of the suction system.

This standard applies to central suction source equipment that provides vacuum pressure and airflow at the connection point of the pipeline facility.

This standard does not apply to portable suction source equipment, air/hydroventuri suction equipment, or suction source equipment located in the treatment room.

This standard also does not apply to suction source equipment used for life support or removal of halogenated anesthetic gases.

This standard does not include requirements for suction piping facilities and exhaust piping systems or treatment room equipment.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article

Pieces. For undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 2624.1 Use a differential pressure device installed in a circular cross-section pipe to measure the flow of fluid in a full pipe. Part 1.General principles and

Requirements (GB/T 2624.1-2006, ISO 5167-1.2003, IDT)

GB 4706.1 Safety of household and similar electrical appliances Part 1.General requirements (GB 4706.1-2005, IEC 60335-1.

2004, IDT)

GB 9706.1 Medical electrical equipment Part 1.General requirements for basic safety and basic performance (GB 9706.1-2020, IEC 60601-1.2012, MOD)

GB/T 9937 Dental Terminology (GB/T 9937-2020, ISO 1942.2009, MOD)

GB/T 17799.2 Electromagnetic compatibility general standard industrial environment immunity test (GB/T 17799.2-2003, IEC 61000-6-2.1999, IDT)

GB 17799.3 General Standard for Electromagnetic Compatibility. Emissions in Residential, Commercial and Light Industrial Environments (GB 17799.3-2012, IEC 61000-6-3.2011, IDT)

GB/T 31523.1 Safety Information Identification System Part 1.Marking (GB/T 31523.1-2015, ISO 7010.2011,

MOD)

YY/T 0628 Graphical symbols for dental equipment (YY/T 0628-2020, ISO 9687.2015 AMD1.2018,

IDT)

YY 0835 Dental amalgam separator (YY 0835-2011, ISO 11143.2008, MOD)

YY/T 1043.2 Dental treatment machine for dentistry Part 2.Gas, water, suction and waste water system (YY/T 1043.2-2018,

ISO 7494-2.2015, IDT)

YY 9706.102 Medical electrical equipment Part 1-2.General requirements for basic safety and basic performance

Capacity requirements and tests (YY 9706.102-2021, IEC 60601-1-2.2007, IDT)

ISO 29463-1.2017 High-efficiency filters and filter media used to remove particles in the air Part 1.Classification, performance, testing

And mark (Highefficiencyfiltersandfiltermediaforremovingparticlesfromair-Part 1.Classification, performance,testingandmarking) […]