SN/T 3700-2013Technical requirements for the inspection of complete set of equipment for import and export. General rule (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard by the People's Republic of China Shanghai Exit Inspection and Quarantine is responsible for drafting.

Participated in the drafting of this standard. People's Republic of China Hubei Exit Inspection and Quarantine, People's Republic of China Liaoning Entry-Exit Inspection and Quarantine Bureau.

Introduction

The standards used in the latest version of the relevant national standards, you can make this and other standards and national standards related to import and export electromechanical Product testing inspection and quarantine industry standard coherence.

This standard belongs to the industry standard of inspection and quarantine system on the third floor --- general categories, provides for the implementation of complete sets of equipment import and export inspection pass with test technical requirements. This standard is based on technology import and export inspection equipment, various types of equipment designed to make a detailed inspection test Personality under standard part of the technical provisions to help, guide and play a regulatory role, and in the absence of a suitable personality for such standard situations Test equipment to provide guidance.

The purpose of this standard is to test as much as possible the technical requirements of the import and export of complete sets of equipment within the respective ranges unanimously, to avoid depending on the standards required for testing.

This standard contains a variety of test equipment standard technical requirements are considered in all the basic requirements of content.

Applicable to a particular test equipment technical requirements of the standard basic requirement in the relevant technical requirements of the standard test equipment (Hereinafter referred to as. "Specific equipment standards") should be made clear, and this should mark the reference standard (in all types of test equipment standard technical requirements Test equipment for a particular technical requirements of the standard may not be specified basic requirements, so that the content may be omitted (when not applicable), or you can add some content (such as that the basic requirements in some cases not applicable), unless there is good reason, specific standard equipment Allowed contrary to the basic requirements.

Equipment Import and Export Inspection Technology Requirements General rule

1 Scope

This standard specifies the import and export of complete sets of equipment inspection and general technical requirements, given specific technical requirements for equipment inspection standard preparation Guide.

3.1 This standard applies to the definition of "equipment" test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 2894 Safety Signs and use guidelines GB 3095 Ambient Air Quality Standard CB/T 3766 Hydraulic System General technical conditions GB 3836.1 explosive atmospheres - Part 1. General requirements for equipment GB 4208 housing protection (IP Code) GB 4793.1 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements GB 5083 production equipment with safety and health General GB 5226.1 mechanical and electrical safety of machinery - Electrical equipment - Part 1. General requirements GB/T 5817 industrial dust hazard degree GB/T 7932 General technical conditions of pneumatic systems GB/T 8196 mechanical safety devices fixed and movable guards General requirements for the design and manufacture GB 8702 electromagnetic radiation protection GB 8978 Integrated Wastewater Discharge Standard GB 9175 environmental electromagnetic health standards GB/T 9969 General Instructions industrial products GB/T 11918 industrial plugs and sockets and couplers - Part 1. General requirements GB 11291.1 Robots for industrial environments - Safety requirements - Part 1. Robots GB 23821 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs GB 12265.3 Safety of machinery to avoid crushing of parts of the human body minimum spacing GB 12348 boundary of industrial enterprises noise emission standards GB/T 12801 General requirements for the production process safety and health GB 14048.1 low-voltage switchgear and control equipment - Part 1. General GB 2894 Safety Signs and use guidelines GB 16297 Air Pollutant Emission Standards GB 16754 Safety of machinery - Emergency stop design principles GB/T 17045 Universal Protection against electric shock devices and equipment GB 17888.1 Safety of machinery stationary facilities - Part 1. Choice of fixed means of access between two planes