Valid

SN/T 3719.2-2013Technical requirements for the inspection of complete set of equipment in textile industry for import and export. Part 2: Wor sted equipment (English PDF)

进出口纺织行业成套设备检验技术要求 第2部分:毛纺织设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (6 pages)

Need quotation for your management?

Get a formal quotation for SN/T 3719.2-2013 in 30 minutes.

Issued by

General Administration of Customs

Level / Type

National · Recommended

Issue date

November 6, 2013

Implementation date

June 1, 2014

Scope

SN/T 3719.2-2013 is the English-translated version of 进出口纺织行业成套设备检验技术要求 第2部分:毛纺织设备.

SN/T 3719.2-2013 - SN/T 3719 provisions of this part of the textile industry, import and export of complete sets of equipment in the wool textile equipment (hereinafter referred to as wool textile equipment) Technical inspection requirements.

This section applies to 3.1 defined test A wool textile equipment listed in Appendix, outside the above range can refer to wool textile equipment use.

Found what you need?

Document preview — SN/T 3719.2-2013

National Standard of the People's Republic of China

ICS
59.120
Classification
W90

Issued by: General Administration of Customs

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Technical Requirements
  • 4.1 General requirements
  • 4.2 Safety Requirements

Foreword

SN/T 3719 "Textile Industry Import and Export Inspection equipment technical requirements" is divided into two parts.

--- Part 1. chemical fiber equipment;

--- Part 2. wool textile equipment.

This section SN/T 3719 Part 2.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This standard is proposed and managed by the National Certification and Accreditation Administration Committee.

This standard by the People's Republic of China Shandong CIQ is responsible for drafting.

1 Scope

SN/T 3719 provisions of this part of the textile industry, import and export of complete sets of equipment in the wool textile equipment (hereinafter referred to as wool textile equipment) Technical inspection requirements.

This section applies to 3.1 defined test A wool textile equipment listed in Appendix, outside the above range can refer to wool textile equipment use.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB 23821-2009 Safety of machinery - Safety distances to prevent danger zones being reached on the lower limbs GB 12348 industrial enterprises of environmental noise emission standard plant boundary SN/T 3700-2013 Equipment Import and Export Inspection General technical requirements

3 Terms and Definitions

GB 23821-2009, GB 12348 and SN/T 3700-2013 and defined the following terms and definitions apply to this document.

Wool textile equipment worstedequipment Composed according to a certain process requirements, it can be produced, manufactured, processed or semi-finished wool fiber textiles professional equipment, and combinations thereof. This Some professional equipment, and combinations thereof with the overall process indicators, technical parameters, and (or) performance.

4 Technical Requirements

4.1 General requirements

It should comply with SN/T 3700-2013 4.1.

4.2 Safety Requirements

4.2.1 Mechanical safety requirements

4.2.1.1 wool textile machinery equipment safety requirements should be consistent with SN/T 3700-2013 4.2.2.

4.2.1.2 The machine should be running smoothly, oiled, no abnormal impact sounds.

4.2.1.3 Each box seal, no leakage pressure line.

4.2.1.4 syringe roving rubbing plate must wear, oil can be anti-static, not astringent, not sticky, does not allow a drum-shaped deformation and elongation.

4.2.1.5 scouring machine should be at least equal to 100mm immersion roller blade ends between the adjacent machine parts with a pitch, or you can root According to GB 23821-2009 in Table 2 in the trapping zone with a side shield.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.

Referenced standards

How to Download SN/T 3719.2-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
6 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SN/T 3719.2-2013

$105.00