SN/T 3480.5-2019Technical requirements for inspection of complete sets of equipment for imported electronics and electrical industry. Part 5: Special equipment for motor manufacturing (English PDF)

Foreword

There are 5 parts in the SN/T 3480 "Technical Requirements for the Inspection of Complete Equipment for Imported Electronic and Electrical Industries".

--- Part 1. Surface mount equipment for printed circuit boards;

--- Part 2. Special equipment for wire and cable manufacturing;

--- Part 3. Special equipment for flat panel display manufacturing;

--- Part 4. Semiconductor packaging test equipment;

--- Part 5. Special equipment for motor manufacturing.

This part is the fifth part of Sn/T 3480.

This section is drafted according to the requirements of GB/T 1.1-2009.

Please note that some of this section may involve patents. The issuing authority of this section is not responsible for identifying these patents.

This section is proposed and managed by the General Administration of Customs of the People's Republic of China.

1 Scope

This part of SN/T 3480 specifies the inspection technical requirements for special equipment for imported motor manufacturing.

This section applies to the inspection of special equipment for motor manufacturing (see Appendix A) as defined in 3.1.

The equipment can also be used by reference.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this document.

file. For undated references, the latest version (including all amendments) applies to this document.

GB/T 2900.39 Electrical terminology Motor, transformer special equipment GB/T 16679 Noise sound pressure level measurement method for metal cutting machine tools SN/T 3700-2013 General requirements for inspection technical requirements for import and export complete sets of equipment

3 Terms and definitions

The terms and definitions defined in GB/T 2900.39, Sn/T 3700-2013 and the following apply to this document.

Equipment, insulation treatment equipment and other equipment.

4 Technical requirements

5 Inspection

5.1 Inspection items are divided into key inspection items and general inspection items. Key inspection items should be regarded as mandatory inspection items, and general inspection items can be viewed Select the actual situation for inspection.

5.2 Inspection of special equipment for motor manufacturing shall be carried out at the corresponding inspection stage in accordance with the inspection items, inspection basis and inspection methods specified in Table 1.

Implement inspection.

Table 1 Inspection items, inspection basis and inspection methods

No. Item Category Inspection Item Inspection Based on Inspection Method Implementation Inspection Stage A B C

1 Mechanical safety requirements for safety items * 4.2.1 Inspection/function test sqrt sqrt sqrt

2 Electrical safety requirements for safety projects * 4.2.2 Inspection/testing/function test sqrt sqrt sqrt

3 Requirements for safety protection devices and warning methods for safety projects * 4.2.3 Inspection/function test sqrt sqrt sqrt

4 Non-mechanical safety requirements for safety items * 4.2.4 Inspection/testing/functional test sqrt sqrt sqrt

5 Substance and material safety requirements for safety projects * 4.2.5 Inspection/testing/functional test sqrt sqrt sqrt

6 Ergonomic requirements for safety projects 4.2.6 Inspection/function test sqrt sqrt

7 Information requirements for the use of security projects * 4.2.7 Inspection/data review sqrt sqrt

8 Other relevant requirements for security projects 4.2.8 Inspection/data review sqrt sqrt sqrt

9 Environmental protection project Requirements for environmental protection project 4.3 Testing/data reviewsqrt

10 Hygiene Project Requirements for Health Project 4.4 Inspection/Data Review sqrt

Note 1. "A" pre-shipment inspection, "B" field installation and commissioning inspection, and "C" field trial operation inspection.

Note 2. "*" key inspection items, "sqrt" option.

SN/T 3480.5-2019

Appendix A

(Informative appendix) Motor manufacturing special equipment A. 1 Overview the special equipment for motor manufacture is mainly composed of coil and stator and rotor manufacturing equipment, core manufacturing equipment, insulation processing equipment and other equipment.

A. 2 Coil and stator and rotor manufacturing equipment the coil, stator and rotor manufacturing equipment mainly includes Table A. Equipment listed in 1.

Table A. 1 Chinese and English comparison table for coil, stator and rotor manufacturing equipment

Chinese name for coil and stator and rotor manufacturing equipment English name for coil and stator and rotor manufacturing equipment Winding machine Coilwinding machine Horizontal Winding Machine Horzontal Winding Machine Vertical Winding Machine Vertical Winding Machine Flat-winding machine Strip-on-edging window machine String mode winding machine Small motor stator winding wire mold winding machine Statocoilwinding machine Stator Coiling Machine Stator-wound embedded wire combination machine Combination machine performance machine Rotor Winding Machine Rotorcoilwindingdinningmachine Rotary Rotary Winding and Inserting Machine Turn-tyrotorcoilwinding motorschining machinery Rotor-fixed rotor winding machine Main-phase coil compaction machine Main-phase co-pressing machine Stator End Shaping Machine Statorover Coilforminking Small Motor Stator End Shaping Machine End pre-shaping machine Overhanging Forming Machine End middle shaping machine Overhancing Commination Forming Forging End final shaping machine Overhangolinfingerminchine Groove Insulation Forming and Cutting Machine Slotting Slot insulation forming inserting machine Slotsuplingspinningsing machine Stator slot insulation inserting machine Stator'sslotinintinizing machine Multi-slot slot insulation forming inserting machine Multi-slottinshaopingpinningsing machine Slot Wedge Forming Cutting Machine Sliding Forming Cutout Machine Slot Wedge Insertion Machine Sliding Gearing Machine SN/T 3480.5-2019

Table A. 1 (continued)

Chinese name for coil and stator and rotor manufacturing equipment English name for coil and stator and rotor manufacturing equipment Stator detection marking slot combo machine Combination machine inspection, letering electronics Coil expansion machine Coilxpanning machine Coil orthopedic machine Coilformecgyingmachine Stator single head strapping machine Single-headstorator Stator double-head lashing machine Double-headstorator Double-station stator lashing machine Statolacerwitdualstatins Small motor stator end strapping machine Statorover-hanging machine-milling machine Rotor binding machine Rotorlacer Taping machine Taping machine Frame Coil Taping Machine Diamond Coil Taping Machine Desktop strapping machine Benchpetapiemingmachine Stator bar strapping machine Taping machine forstorbar Electric heating charter Electricy Heated Wrapped Pinching Machine Electrostatic ring (plate) bandaging machine Wrapping machine forcing stamping Frame-type coil presses Diamoncollo BLACK PRECESS Stator bar moulding machine Pressprestortorbar Drop paint machine Trikleimpregnating machine Stator drip paint machine Statelighting machinery Rotor Drip Painter Armature Trimming Premigning Machine A. 3 Iron core manufacturing equipment Core manufacturing equipment mainly includes Table A. 2 listed equipment.

Table A. 2 Chinese and English name comparison table of iron core manufacturing equipment

Chinese name of iron core manufacturing equipment English name of iron core manufacturing equipment Grooving machine Notching Press Automatic Grooving Machine Automatching Internal positioning slotting machine Spindle-type-fixing-pointing channels Outer Positioning Punching Machine Ring-tyfiverenting Sector Sheet Notching Machine Segment Notch Ching Press Combining slotting unit for combined slotting unit Automatic Grooving Winding Machine Automating Winding Stamping Machine SN/T 3480.5-2019

Table A. 2 (continued)

Chinese name of iron core manufacturing equipment English name of iron core manufacturing equipment Stator core stacking machine Statorstocking machine Rotor core lamination machine Rotorstatking machine (Iron chip) Deburring machine Burr-grinding machine Silicon Steel Sheet Continuous Annealing Furnace A. 4 Insulation processing equipment Insulation processing equipment mainly includes Table A. Equipment listed in 3.

Table A. 3 Chinese and English names of insulation treatment equipment

Other equipment Chinese name Other equipment English name Vapor Phase Drying Equipment Vapor Phase Drying Plant Hot Air Circulation Vacuum Drying Furnace Vacuum Cooling Vacuum-pressure impregnation equipment Vacumpresuirepregnantion Variable pressure vacuum drying equipment Pressurincreasing dyeing Epoxy vacuum casting equipment Epoxyrevacumcumcasting Impregnating tank Vacuum tank Autoclave Horizontal impregnation tank Horizontalpregnantion tank Vertical impregnation tank Verticlimpignation tank Paint storage tank Epoxy spraying machine Coaching machine A. 5 other equipment Other equipment mainly includes Table A. 4 listed content.

Table A. 4 Chinese and English names of other equipment

Other equipment Chinese name Other equipment English name Commutator Undercutting Machine Commutator Undercutting Machine Micro-motor commutator under engraving machine Microcomormoutatortorcutting machine Commutator welding machine commutator welding machine Rotor die-casting aluminum machine Aluminum die-casting machine Rotor low-pressure cast aluminum machine Low-pressurium alloy-casting machine-foror SN/T 3480.5-2019

Table A. 4 (continued)

Other equipment Chinese name Other equipment English name Rotor heat jacket machine Rotorshkinking machine Motor Bearing Pressing Machine Beaingshine Kinmachine Motor assembly production line Motolassmbling Motor End Cover Presses Endover Press Motor core presses Pressor motor press Silicon steel sheet painting machine Coaing machine floor machine SN/T 3480.5-2019