SN/T 1688.3-2005Rules for the inspection of power-driven vehicles for import and export. Part 3: Agricultural vehicles (English PDF)

Foreword

SN/T 1688 "Import and Export Motor Vehicle Inspection Regulations" is divided into several parts, and its expected structure is.

--- Part 1 General Requirements;

--- Part 2 motorcycles;

--- Part 3 agricultural transport vehicles.

This part is the third part of SN/T 1688.

This part is proposed and managed by the National Certification and Accreditation Administration.

This section drafted by. Luoyang Entry-Exit Inspection and Quarantine Bureau, National Tractor Quality Supervision and Inspection Center.

Introduction

The "Import and Export Motor Vehicle Inspection Regulations" is the basis for the inspection of import and export motor vehicles, and provides guidance for the inspection of import and export motor vehicles.

And normative role.

With the revision of China's accession to the World Trade Organization (WTO) and the "Commodity Inspection Law," the import and export commodity inspection work model has undergone great changes.

In order to adapt to the situation and changes, the national inspection and quarantine authorities have established a system of inspection and quarantine standards.

This part belongs to the fourth layer of the inspection and quarantine standard system (the third layer of the professional standard system for electromechanical inspection)---personality standard, for agricultural transportation Special requirements for vehicle inspection procedures.

Import and export motor vehicle inspection procedures Part 3. Agricultural transport vehicles

1 Scope

This section specifies the requirements, inspection and judgment of agricultural transport vehicles.

This section applies to four-wheeled agricultural transport vehicles and three-wheeled agricultural transport vehicles.

2 Normative references

The terms in the following documents become the provisions of this part by reference to this part of SN/T 1688. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.

GB/T 2828.1. Sampling and sampling procedures - Part 1 . Batch-to-batch sampling plan searched by the acceptance quality limit (AQL) GB 18320-2001 Agricultural transport vehicle safety technical requirements GB 18321-2001 Noise limits for agricultural transport vehicles GB 18322-2002 Free speed smoke emission limit and measurement method for agricultural transport vehicles JB/T 7234 general technical conditions for four-wheel agricultural transport vehicles JB/T 7236 three-wheel agricultural transport vehicle technical conditions JB/T 8405 Agricultural Transport Vehicle Type Inspection Rules Basic requirements for the preparation of SN/T 0002 import and export electromechanical commodity inspection procedures

3 Terms and definitions

The terms and definitions established by GB 18320, SN/T 0002 and the following terms apply to this section.

The products of the same specifications, models and products produced under the same conditions for the purpose of sampling inspection are called inspection batches, referred to as batches.

The quality characteristics of the tractor do not meet the technical requirements specified in this section and are said to be unqualified. According to the unqualified items for the quality characteristics of the product the degree of influence will be classified as unqualified in Class A and unqualified in Class B.

4 General requirements