SN/T 0002.1-2012General rules for drafting of regulations for inspection of import and export mechanical and electrical commodity (English PDF)

4.1 Writing rules

Writing rules for the inspection should be consistent with GB/T 1.1 requirements.

4.2 Category

It should be required to exit inspection and quarantine inspection of professional standards electromechanical system properly categorized develop test procedures. Import and export of electromechanical products inspection Practice category reference SN/T 2447.1-2010 the "Standard System electromechanical test schedule."

4.3 Test basis

Test based on test procedures should be consistent with the provisions of the "People's Republic of China Import and Export Commodity Inspection Law" and relevant laws, regulations and national technical Art specifications mandatory; yet national technical specifications may refer to the mandatory requirements of the State Administration of Quality Supervision, Inspection and Quarantine specified International standards, national standards, importing or exporting country standards and related technical requirements test basis.

4.4 Test mode

Test mode test procedures prescribed categories should be appropriate inspection supervision model to adapt.

4.5 Test content

Test content for the inspection provisions should include safety, hygiene, health, environmental protection, anti-fraud requirements and appropriate quality, quantity, weight Quantity and packaging projects.

5.1 General principles constitute

Constitute the general principles are as follows.

--- Inspection procedures to a category of products as a standardized object, that is a category of products a standard that may be several parts composition.

--- Mechanical and electrical products import and export inspection and quarantine inspection procedures in accordance with the standard system is divided into two levels. the first level is the category through Standard, which cover a category of goods, such as lighting equipment, machine tools, construction machinery; second level personalized standard, covering a Kinds of products, such as portable lamps, drilling, excavators and the like.

--- Inspection procedures to categories of common standards as the main categories of common standards or have been able to cover a certain product is not re-formulate the needle the personality standard kinds of commodities.

--- Inspection procedures should include the entire contents of the applicable product import and export inspection. Under special circumstances and to be certain product-specific test content Classification, can be divided into the standard only relates to the content of a particular test several parts, but not to the product categories are divided into several departments Then verify the contents of a particular sub-divided into several parts.

5.2 Test procedures specific structure

Inspection of a specific structure as follows.

--- In the inspection procedure is divided into two levels under the circumstances, similar products as a standard General requirements for the first part of such products Special requirements of different products as other parts;

Example 1. ××× inspection of import and export - Part 1. General requirements ××× inspection of import and export - Part N. *** special requirements

Note 1. no special requirements apply only to formulate general requirements or general requirements can not cover the test items of the product of circumstances.

Note 2. Particular requirements *** shall be stated with the requirements of the special requirements of such products and general requirements in its preamble.

--- For the energy into a separate category, not attributable to a single door type of product is a preparation for the inspection;

Example 2. the inspection of import and export ×××

--- Certain products involving testing a specific content, and can be used separately to prepare a separate special cases, the Only relates to a particular standard is divided into several parts content inspection;

Part of the inspection of import and export ××× 1. Example 3. Safety Inspection Importers ××× test procedures - Part 2. Electromagnetic compatibility tests ××× inspection of import and export - Part 3. Energy Consumption Test ××× inspection of import and export - Part 4. Inspection of Hazardous Substances

--- Standard applies to one or a category of products, but its import and export inspection contents and requirements vary widely, it can import and Exports to write two parts.

Part of the inspection of import and export ××× 1.. Sample 4 import inspection ××× of import and export - Part 2. Export inspection

5.3 Structure and preparation of the order

The general structure of inspection procedures and the preparation of the following order.

1) optional feature, according to the characteristics of the object and standard standardization purposes may be, it can be classified as empty chapter.

2) If the test mode, there are two or more sub-chapter should be prepared.

5.4 Inspection procedures format

The format for the inspection shall comply with GB/T 1.1 in Annex H.

6.1 Overview of data elements

6.1.1 Cover

Each inspection procedures should have a cover. Cover test procedures should be consistent with the provisions of GB/T 1.1 in 6.1.1.

6.1.2 Table of Contents

Directory is an optional feature, and list the order shall comply with GB/T 1.1 in 6.1.2.

6.1.3 Introduction

Each inspection procedures should have a preface, and it consists of a specific portion of the basic portion. Specific part of the case should be considered in turn gives the following information.

--- Description of the standard configuration; if the standard requirements and the general composition should provide a number of special requirements and the special requirements of such products to GM Seeking relationship and cooperation is required;

--- Indicate the use of international standards and foreign advanced standards of the degree of adoption and version; description of other similar international guidelines or standards, norms Using the case and other documents;

--- Indicate the main technical differences between the use of the object and a brief justification;

--- Description of the standard in place of all or part of other documents or repealed;

--- Description with the previous versions of important technical content change the situation;

--- Links with other standards or documents;

--- Specify the nature of the appendix.

An essential part of proper given the following information.

--- This standard is proposed and managed by the National Certification and Accreditation Administration of the People's Republic of China;

--- This standard was drafted (may specify the units responsible for drafting and participated in the drafting when required);

--- Drafters of this standard;

--- The standard replaces the previous editions.

If the standard published in parts, it should be said column item in the "standard" to "in this section."

6.2 Normative general elements

6.2.1 Standard name

The standard name is essential elements. Determine the standard name of the following principles.

Name --- test procedures refer to "Mechanical and Electrical Inspection Standard System List" to determine the appropriate classification;

--- Standard common to certain categories of products, and some varieties of such products have special requirements, use. "Import and Export Inspection ××× Regulations Part 1. General requirements ";

Example 1. the inspection of import and export tools - Part 1. General requirements

--- Standard applies to certain categories of products in certain species have special requirements, when and with common standards with the use of these products, so with. "××× inspection of import and export - Part N. *** special requirements";

Example 2. Import-export machine testing procedures - Part 2. Particular requirements for CNC machine tools Importers machine test procedures - Part N. *** special requirements

NOTE. "×××" on behalf of certain goods, "***" on behalf of such goods in a commodity.

--- When the standard is fully applicable to a one or a category of products, the use of. "××× import and export inspection procedures";

Example 3. The inlet and outlet valves for the inspection

--- Standard applies to one or a category of products, but its import and export inspection contents and requirements vary widely, it can import and Export in two parts, use. "the inspection of import and export ××× Part 1/2. import/export inspection";

Part of the inspection of import and export of complete sets of equipment 1.. Sample 4 import inspection Import and export inspection of equipment - Part 2. Export inspection

--- Test content and requirements vary widely when a particular product or a particular category, it may be a different test content and requirements at the different portions Min Use. "××× inspection of import and export - Part N. deltadeltadelta test";

Example 5. the inspection of import and export of medical equipment - Part 1. Safety requirements Inspection of import and export of medical devices - Part 2. Electromagnetic compatibility tests

NOTE. "deltadeltadelta" represents a different test content, such as safety, electromagnetic compatibility, energy consumption, hazardous substances and properties.

--- Standard covers the following name, the name should be written in English. Standard English name should match the Chinese name. English name use the following terms. "Rulesfortheinspectionofforimportandexport".

6.2.2 Range

Range of essential elements, should be a brief description of the main content of the standard. It uses the following terms.

"This standard specifies." Scope This standard applies shall describe the types of goods name. It uses the following terms.

"This standard applies." "This standard applies to, but also for." "This standard applies to, should also refer to use." "This standard does not apply." this standard applies to the wide range of products can be listed in its HS code, HS encoding is also available in the form of appendix lists.

6.2.3 Normative References

Normative references are optional elements, technical elements should be listed in the referenced standard is essential for the use of the technical specifications and Standard documents, most of the standard list, including their standard number (code, order number, reign) and name. Specific methods, see reference GB/T 1.1 in 6.2.3.

The list should begin with the following blurb.

"The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. " this list should not generally include.

--- Files are not publicly available;

--- For information only reference documents;

--- Standards as the only reference document.

These files can be listed in the informative appendix.

6.3 Normative technical elements

6.3.1 Terms and Definitions

Terms and definitions is an optional feature, which is given only to understand the definition of certain terms in the standard required. Standards should existing normative There is no reference in the definition file specified, or Notwithstanding the provisions, but its meaning is not yet fully adapted to define the import and export inspection required to give instructions.

Certain terms or concepts of the industry (Inspection and Quarantine) is often used without creating ambiguity is not in the "Terms and Definitions" chapter Given the terms and their definitions.

Terms and Definitions The following entries shall be drawn appropriate introductory phrase.

--- Under normal circumstances. "is defined and the following terms and definitions apply to this document for ease of use, this document is heavy.

Complex lists some terms and definitions. "

--- Only the terms and definitions defined in applicable standards, use the "following terms and definitions apply to this document."

--- Only the terms and definitions defined in other documents, where applicable, use the "define terms and definitions apply to this document." Terms and definitions of classification and arrangement according to GB/T 1.1-2009 requirements in 6.3.2.

6.3.2 General requirements

The total requirement is an optional feature, the general requirements of the provisions of such product testing. Generally comprises.

---Safety requirements;

--- Hygiene and health requirements;

--- Environmental protection requirements;

--- Technical performance requirements (quality requirements);

--- Quantity, weight, packaging and other requirements;

---other requirements.

6.3.3 Mode Select inspection and supervision

Select the inspection and supervision model is an essential element. Based on an assessment of the risk of product testing, inspection and product testing response was supervision mode or make a clear choice requirements. Import and export of electromechanical products the basic elements of risk assessment, see Appendix A. Inspection and supervision mode selection shall comply with the provisions of the national inspection and quarantine department in charge of the testing is to test the product or product manufacturing enterprises inspection and supervision model requirements.

6.3.4 Implementation of inspection

6.3.4.1 Test mode

Import and export of electromechanical products testing including but not limited to full inspection, batch sampling, pumping batch sampling, type testing, test cycle Inspection, special testing, conformance testing, declaration of conformity assessments checks, check verification orders, supervision and management and other elements of conformity assessment.

When carrying out inspection of the inspection batch may ...