SN/T 0002.2-2012General stipulation for drafting of standards on inspection method of mechanical and electrical commodity for import and export (English PDF)

Foreword

SN/T 0002 is divided into two parts.

--- Part 1. mechanical and electrical products import and export inspection procedures prepared by the basic provisions;

--- Part 2. import and export of electromechanical products to prepare the basic provisions of standard testing methods.

This section SN/T 0002 Part 2.

This section according to GB/T 1.1-2009. Drafting Rules "Standardization Guide Part 1 standard structure and preparation of" given.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

Currently, suitable for routine inspection and supervision of import and export of electromechanical products inspection regulations class industry standards are maturing, covering China's major Import and export of mechanical and electrical products. With the development of inspection and supervision work to depth direction and greatly enhance the strength of the test system mechanical and electrical products, national Inspection and quarantine system put forward higher requirements. At the same time, the pace of transformation of mechanical and electrical products of international standards is also accelerating, applicable in particular type testing and inspection, measuring, testing methods import and export of electromechanical products during the test, the measurement methods, test methods for class industry Emerging standards, such as safety testing methods, safety type test methods, energy efficiency testing methods. To further regulate the import and export of electromechanical products Class industry standard test methods to ensure the quality and efficiency of the preparation, to make it more systematic, scientific, applicability and operability, especially the development of this section.

Import and export of electromechanical products testing method is an important part of the professional import and export mechanical and electrical inspection industry standard system, the inspection of classes and Requirements class industry standards based technology, is an important basis for the import and export inspection and quarantine agencies to implement inspection and supervision of mechanical and electrical products.

According to the relevant provisions of WTO rules and China's "Commodity Inspection Law", the import and export of electromechanical products Inspection and testing methods should be combined Phytophthora actual work, focused on safety, hygiene, health, environmental protection, recycling, energy efficiency, specific testing methods to prepare projects.

This section is part of an industry standard system in the second layer of common professional standards.

Import and export of electromechanical products standard test method Preparation of basic provisions

1 Scope

SN/T 0002 provisions of this part of the import and export of electromechanical products testing methods, measurement methods, test method (hereinafter referred to as "the inspecting Party Basic requirements Law "), etc., or to test methods for class-based industry standard preparation, structure, format, write sequence, content, drafting and presentation Methods.

This section applies to the import and export of electromechanical products standard test method (hereinafter referred to as "standard test method") preparation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 1.1-2009 for standardization - Part 1. Standard structure and drafting GB/T 20000.3 Guide for standardization - Part 3. Reference File Part of GB/T 20001.1 standard rules for the preparation of 1. Terminology the basic provisions of SN/T 0002.1 inspection of import and export of electromechanical products prepared

3 Terms and Definitions

GB/T 1.1, GB/T 20000.3, GB/T 20001.1 and SN/T 0002.1 and established the following terms and definitions apply to this file.

Test methods inspectionmethod Measurement measurementmethod Test methods testmethod in accordance with prescribed procedures to determine to the proposition given product or more characteristics for processing or to provide specific technical operator services consisting of Methods such as visual inspection, measurement and testing. Sometimes referred to as detection methods, test methods.

4 Basic requirements

4.1 preparation of standard test methods should be consistent with GB/T 1.1-2009 requirements.

4.2 should be required to import and export mechanical and electrical inspection of the professional industry standard system properly categorized develop standard test methods. Category may refer to SN/T 0002.1.

4.3 For certain categories of products do not belong, separately prepared standard test method for the product.

4.4 standard test method should give priority to international standard method has been published, the regional standard method national standard method of importing countries, Chinese State Suitable or impossible to use.

4.5 If the standard test method using non-standard methods, it must be noted and appropriate verification and validation. Verification and validation of the range package