QC/T 673-2007Liquefied petroleum gas solenoid valves for automobiles (English PDF)
汽车用液化石油气电磁阀
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 673-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 14, 2007
Implementation date
May 1, 2008
Scope
QC/T 673-2007 is the English-translated version of 汽车用液化石油气电磁阀.
QC/T 673-2007 is the Chinese standard "Liquefied petroleum gas solenoid valves for automobiles". Its scope clause reads: This standard specifies the product type, technical requirements, test methods, inspection rules, marking, packaging, transport and storage of solenoid valve of LPG vehicles (as defined in GB/T 17895).
This standard is applicable to solenoid valves that realize on-off control function in the LPG supply system of gas vehicles, using LPG for vehicles that complies with the requirements of GB 19159 as the operating media, under the operating environment conditions with rated operating pressure not greater than 2.2 MPa (pressures referred to in this standard are all gauge pressures), environment temperature of -40°C to +120°C and relative humidity of 50% to 100%. Its clauses include terms and definitions.
Found what you need?
Document preview — QC/T 673-2007
National Standard of the People's Republic of China
- Replacing
- QC/T 673-2000
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Type and basic parameters
- 5 Requirements
- 6 Test methods
- 7 Inspection rules
- 8 Marking, packaging, transport and storage
- 9 Documentation
1 Scope
This standard specifies the product type, technical requirements, test methods, inspection rules, marking, packaging, transport and storage of solenoid valve of LPG vehicles (as defined in GB/T 17895).
This standard is applicable to solenoid valves that realize on-off control function in the LPG supply system of gas vehicles, using LPG for vehicles that complies with the requirements of GB 19159 as the operating media, under the operating environment conditions with rated operating pressure not greater than 2.2 MPa (pressures referred to in this standard are all gauge pressures), environment temperature of -40°C to +120°C and relative humidity of 50% to 100%.
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated reference, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition applies.
GB/T 528 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties
GB/T 5626.1 Flared type tube fittings - Male connector - Assembly
GB/T 7762 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Static strain testing
GB 9969.1 General principles for preparation of instructions for use of industrial products
GB/T 10125 Corrosion tests in artificial atmospheres - Salt spray tests
GB/T 17895 Natural gas vehicle and liquefied petroleum gas vehicle - Vocabulary
GB 19159 Automotive liquefied petroleum gases
GB/T 19239 Mounting requirements of special equipment for liquefied petroleum gas vehicles
QC/T 247 Technical specifications for special devices of LPG vehicles
QC/T 745 Rubber pipelines for liquefied petroleum gas vehicles
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of QC/T 673
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 673-2007 | Liquefied petroleum gas solenoid valves for automobiles | current edition | Current |
| QC/T 673-2000 | Liquefied petroleum gas solenoid valves for automobiles | previous edition | Superseded |
This page sells the current edition, QC/T 673-2007. Earlier editions are listed for reference only.
How to Download QC/T 673-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 673-2007
$165.00