JB/T 9822.1-2018Hammer mills for feed - Part 1: Technical requirements (English PDF)
锤片式饲料粉碎机 第1部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9822.1-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 9, 2018
Implementation date
October 1, 2018
Scope
JB/T 9822.1-2018 is the English-translated version of 锤片式饲料粉碎机 第1部分：技术条件.
Part 1 of JB/T 9822, issued as JB/T 9822.1-2018, is the Chinese machinery industry standard that specifies hammer mills for animal feed. It sets out the method for writing the model designation and the main technical performance of the machine, then states the technical requirements and the safety requirements.
Inspection rules follow, and the last clauses cover marking, packaging and storage. It quotes GB/T 3098.1-2010, GB/T 3098.2-2015, GB/T 6971-2007, GB/T 8196, GB/T 9239.1-2006, GB/T 9480, GB 10396, GB/T 12620-2008, GB/T 13306, GB/T 17890, JB/T 9822.2 and JB/T 9832.2-1999. It replaces JB/T 9822.1-2008.
Found what you need?
Document preview — JB/T 9822.1-2018
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 9822.1-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9822.1-2018 was issued by MIIT on 9 February 2018 and has been in force since 1 October 2018.
It replaces the earlier edition JB/T 9822.1-2008, JB/T 9822.1-1999.
It is one of 4 parts of the JB/T 9822 series.
2 Scope
Part 1 of JB/T 9822, issued as JB/T 9822.1-2018, is the Chinese machinery industry standard that specifies hammer mills for animal feed. It sets out the method for writing the model designation and the main technical performance of the machine, then states the technical requirements and the safety requirements. Inspection rules follow, and the last clauses cover marking, packaging and storage. It quotes GB/T 3098.1-2010, GB/T 3098.2-2015, GB/T 6971-2007, GB/T 8196, GB/T 9239.1-2006, GB/T 9480, GB 10396, GB/T 12620-2008, GB/T 13306, GB/T 17890, JB/T 9822.2 and JB/T 9832.2-1999. It replaces JB/T 9822.1-2008.
3 Normative references
JB/T 9822.1-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs
GB/T 3098.2-2015 — Mechanical properties of fasteners -- Nuts
GB/T 6971-2007 — Test method for feed mills
GB/T 8196
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 9480
GB 10396
GB/T 12620-2008 — Round and elongated apertures with round and square plate screens
GB/T 13306
GB/T 17890
JB/T 9822.2
JB/T 9832.2-1999 — Agricultural and forestry tractors and machinery - Paint coatings - Cross-cut adhesion test
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9822.2-1999 — Hammer mills for feed - Hammers
JB/T 9822.2-2008 — Hammer mills for feed - Part 2: Hammers
JB/T 9822.2-2018 — Hammer mills for feed - Part 2: Hammers
Other editions:
JB/T 9822.1-2008 (earlier edition)
JB/T 9822.1-1999 (earlier edition)
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs
- GB/T 3098.2-2015Mechanical properties of fasteners - Part 2: Nuts
- GB/T 6971-2007Test method for feed mills
- GB/T 8196Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
- GB/T 9480Tractors machinery for agriculture and forestry, powered lawn and garden equipment -- Operators manuals -- Content and presentation
Similar standards
Editions of JB/T 9822.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9822.1-2018 | Hammer mills for feed - Part 1: Technical requirements | current edition | Current |
| JB/T 9822.1-2008 | Hammer mills for feed - Part 1: Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 9822.1-2018. Earlier editions are listed for reference only.
How to Download JB/T 9822.1-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles
GB/T 12620-2008 — Round and elongated apertures with round and square plate screens
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
JB/T 9822.1-2018
$135.00