JB/T 9822.2-2018Hammer mills for feed - Part 2: Hammers (English PDF)
锤片式饲料粉碎机 第2部分：锤片
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9822.2-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 9, 2018
Implementation date
October 1, 2018
Scope
JB/T 9822.2-2018 is the English-translated version of 锤片式饲料粉碎机 第2部分：锤片.
JB/T 9822.2-2018 is the second part of the Chinese machinery industry standard on feed hammer mills, and it deals with the hammers themselves. It states the technical requirements for these hammers, gives the test methods used to check them and sets the inspection rules.
Packaging and storage are covered in the closing clauses. The part carries Chinese classification B93 and international classification 65.060.99, and it has recommended status within the industry series issued by the Ministry of Industry and Information Technology.
It quotes GB/T 230.1, GB/T 699-2015, GB/T 2828.1-2012 and GB/T 9450. The edition it replaces is JB/T 9822.2-2008.
Found what you need?
Document preview — JB/T 9822.2-2018
National Standard of the People's Republic of China
- ICS
- 65.060.99
- Replacing
- JB/T 9822.2-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9822.2-2018 was issued by MIIT on 9 February 2018 and has been in force since 1 October 2018.
It replaces the earlier edition JB/T 9822.2-2008, JB/T 9822.2-1999.
It is one of 4 parts of the JB/T 9822 series.
2 Scope
This standard is the second part of the Chinese machinery industry standard on feed hammer mills, and it deals with the hammers themselves. It states the technical requirements for these hammers, gives the test methods used to check them and sets the inspection rules. Packaging and storage are covered in the closing clauses. The part carries Chinese classification B93 and international classification 65.060.99, and it has recommended status within the industry series issued by the Ministry of Industry and Information Technology. It quotes GB/T 230.1, GB/T 699-2015, GB/T 2828.1-2012 and GB/T 9450. The edition it replaces is JB/T 9822.2-2008.
3 Normative references
JB/T 9822.2-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 230.1
GB/T 699-2015 — Quality carbon structure steels
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 9450
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9822.1-1999 — Hammer mills for feed - Technical requirements
JB/T 9822.1-2008 — Hammer mills for feed - Part 1: Technical requirements
JB/T 9822.1-2018 — Hammer mills for feed - Part 1: Technical requirements
Other editions:
JB/T 9822.2-2008 (earlier edition)
JB/T 9822.2-1999 (earlier edition)
6 Classification and status
International classification (ICS): 65.060.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 699-2015Quality carbon structure steels
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 9450Steel — Determination of Case Hardening Depth After Carburizing or Carbonitriding
Similar standards
Editions of JB/T 9822.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9822.2-2018 | Hammer mills for feed - Part 2: Hammers | current edition | Current |
| JB/T 9822.2-2008 | Hammer mills for feed - Part 2: Hammers | previous edition | Superseded |
This page sells the current edition, JB/T 9822.2-2018. Earlier editions are listed for reference only.
How to Download JB/T 9822.2-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 230.1-2018 — Metallic materials - Rockwell hardness test - Part 1: Test method
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
GB/T 699-2015 — Quality carbon structure steels
Secure payment via Stripe
Payments accepted
JB/T 9822.2-2018
$105.00