JB/T 9663-2013Low voltage reactive power automatic compensating controller (English PDF)
低压无功功率自动补偿控制器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9663-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 9663-2013 is the English-translated version of 低压无功功率自动补偿控制器.
JB/T 9663-2013 is the Chinese standard "Low voltage reactive power automatic compensating controller".
Its scope clause reads: This standard specifies the terminologies and definitions, product classification, technical requirements, test methods, inspection rules, marking and packaging of low voltage reactive power automatic compensating controller (hereinafter referred to as "controller").
This standard is applicable to low voltage reactive power automatic compensating controller with the rated AC voltage not exceeding 1,000 V (or 1,140V) and frequency not exceeding 50Hz or 60Hz. Its clauses include terminologies and definitions.
Found what you need?
Document preview — JB/T 9663-2013
National Standard of the People's Republic of China
- ICS
- 29.120.50
- Replacing
- JB/T 9663-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terminologies and Definitions
- 4 Product Classification
- 5 Operating Conditions
- 5.1 Normal Operating Conditions
- 5.2 Special Operating Conditions
- 6 Transportation and Storage Conditions
- 7 Technical Requirements
- 7.1 Appearance and Structure
- 7.2 Functional Requirements
- 7.3 Performance Requirements
- 7.4 Immunity Test
- 7.5 Dielectric Strength Test
- 7.6 Fire Hazard Test
- 8 Test Methods
- 8.1 General Inspection
- 8.2 Dielectric Strength Test
- 8.3 Functional Inspection
- 8.4 Electrical Performance Tests
- 8.5 Continuous Operation Test
- 8.6 Environment Tests
- 8.7 Immunity Tests
- 8.8 Vibration (Sinusoidal) Test
- 8.9 Impact Test
- 8.10 Protection Grade Test
- 8.11 Fire Hazard Test
- 9 Inspection Rules
- 9.1 Classification of the Inspection
- 9.2 Type Inspection
- 9.3 Routine (End-of-manufacturing) Inspection
- 10 Marking and Packaging
- 10.1 Marking
- 10.2 Packaging
1 Scope
This standard specifies the terminologies and definitions, product classification, technical requirements, test methods, inspection rules, marking and packaging of low voltage reactive power automatic compensating controller (hereinafter referred to as "controller").
This standard is applicable to low voltage reactive power automatic compensating controller with the rated AC voltage not exceeding 1,000 V (or 1,140V) and frequency not exceeding 50Hz or 60Hz.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB 4208 Degrees of Protection Provided by Enclosure (IP Code)
GB/T 4588.2 Sectional Specification: Single and Double Sided Printed Boards with Plated-through Holes
GB/T 5169.7 Fire Hazard Testing for Electric and Electronic Products - Test Methods - Diffusion Type and Premixed Type Flame Test Methods
GB/T 10233-2005 Basic Testing Method for Low-voltage Switchgear and Controlgear Assemblies
3 Terminologies and Definitions
For the purposes of this document, the following terminologies and definitions apply.
3.1 Sampling input
The general name of current sampling input Is inputted into current signal end of controller and voltage sampling input Us inputted into voltage signal end of controller. Controller controls the connection and disconnection of output circuit through carrying out calculation, comparison and judgment for the sampling input.
3.2 Control physical quantity
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4588.2Sectional specification: single and double sided printed boards with plated-through holes
- GB/T 5169.7Fire hazard testing for electric and electronic products -- Test methods for diffusion and premixed flame test methods
- GB/T 10233-2005Basic testing method for low-voltage switchgear and controlgear assemblies
GB 4208
Similar standards
Editions of JB/T 9663
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9663-2013 | Low voltage reactive power automatic compensating controller | current edition | Current |
| JB/T 9663-1999 | Low voltage reactive power automatic compensating controller | previous edition | Superseded |
This page sells the current edition, JB/T 9663-2013. Earlier editions are listed for reference only.
How to Download JB/T 9663-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10233-2005 — Basic testing method for low-voltage switchgear and controlgear assemblies
GB/T 4588.2-1996 — Sectional specification: single and double sided printed boards with plated-through holes
GB/T 5169.7-2001 — Fire hazard testing for electric and electronic products -- Test methods for diffusion and premixed flame test methods
Secure payment via Stripe
Payments accepted
JB/T 9663-2013
$195.00