JB/T 9195-2017Roll forging dies - Technical requirements (English PDF)
辊锻模 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9195-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 9, 2017
Implementation date
July 1, 2017
Scope
JB/T 9195-2017 is the English-translated version of 辊锻模 技术条件.
JB/T 9195-2017 is the Chinese machinery industry standard that fixes the technical requirements for roll forging dies. Alongside the requirements it gives the inspection methods, the rules for acceptance, and the provisions for marking, packaging and transport.
Its field of application is roll forging dies. The standard is a recommended one of the Chinese machinery industry, classified J46 in the Chinese system and 25.120.30 in the international one, and it replaces JB/T 9195-1999.
Among the standards it quotes are GB/T 230.1, GB/T 231.1, GB 825, GB/T 1184-1996, GB/T 1801-2009, GB/T 11880-2008, GB/T 14979 and JB/T 9194.
Found what you need?
Document preview — JB/T 9195-2017
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Replacing
- JB/T 9195-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9195-2017 was issued by MIIT on 9 January 2017 and has been in force since 1 July 2017.
It replaces the earlier edition JB/T 9195-1999.
2 Scope
This standard is the Chinese machinery industry standard that fixes the technical requirements for roll forging dies. Alongside the requirements it gives the inspection methods, the rules for acceptance, and the provisions for marking, packaging and transport. Its field of application is roll forging dies. The standard is a recommended one of the Chinese machinery industry, classified J46 in the Chinese system and 25.120.30 in the international one, and it replaces JB/T 9195-1999. Among the standards it quotes are GB/T 230.1, GB/T 231.1, GB 825, GB/T 1184-1996, GB/T 1801-2009, GB/T 11880-2008, GB/T 14979 and JB/T 9194.
3 Normative references
JB/T 9195-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 230.1
GB/T 231.1
GB 825
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1801-2009
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3098.1-2010 — Mechanical properties of fasteners - Bolts, screws and studs
GB/T 11880-2008
GB/T 14979
JB/T 9194
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9195-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.120.30
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 231.1Metallic materials - Brinell hardness test - Part 1: Test method
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3098.1-2010Mechanical properties of fasteners - Bolts, screws and studs
GB 825 · GB/T 1801-2009
Similar standards
Editions of JB/T 9195
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9195-2017 | Roll forging dies - Technical requirements | current edition | Current |
| JB/T 9195-1999 | Roll forging dies - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 9195-2017. Earlier editions are listed for reference only.
How to Download JB/T 9195-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 14979-1994 — Steel - Micrographic method for assessing the inhomogeneity of eutectic carbides using standard diagrams
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 9195-2017
$85.00