JB/T 9089-2014Pressure Testing Pump (English PDF)
试压泵
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9089-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 9089-2014 is the English-translated version of 试压泵.
JB/T 9089-2014 is a recommended Chinese machinery industry standard for pressure testing pumps. It gives the basic parameters of both the electric and the hand-operated test pump, the technical conditions, the test methods, the inspection rules and the rules for marking, packaging and storage.
Its scope covers test pumps with a rated discharge pressure of up to 200 MPa. The standard is classified J71 in the Chinese system and 23.100 internationally, and it draws on GB/T 1032, GB/T 7784, GB/T 9069, GB/T 13306, GB/T 13384 and JB/T 9090.
It supersedes JB/T 9089-1999. Issued on 9 July 2014, it has applied since 1 November 2014.
Found what you need?
Document preview — JB/T 9089-2014
National Standard of the People's Republic of China
- ICS
- 23.100
- Replacing
- JB/T 9089-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 9089-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 July 2014 and has been in force since 1 November 2014.
It replaces the earlier edition JB/T 9089-1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for pressure testing pumps. It gives the basic parameters of both the electric and the hand-operated test pump, the technical conditions, the test methods, the inspection rules and the rules for marking, packaging and storage. Its scope covers test pumps with a rated discharge pressure of up to 200 MPa. The standard is classified J71 in the Chinese system and 23.100 internationally, and it draws on GB/T 1032, GB/T 7784, GB/T 9069, GB/T 13306, GB/T 13384 and JB/T 9090. It supersedes JB/T 9089-1999.
JB/T 9089-2014 falls under ICS 23.100, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1032
GB/T 7784
GB/T 9069
GB/T 13306
GB/T 13384
JB/T 9090
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 9089-1999 (earlier edition)
Standards on related subjects:
GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method
GB/T 7782-2020 — Metering pump
JB/T 6880.1-2013 — Grey iron castings for pumps
JB/T 8697-2026 — Powered diaphragm pump
JB/T 9090-2014 — Hydrostatic and leakage tests for positive displacement pump components
JB/T 9087-2014 — Reciprocating pump for crude oil, water injection used in oil field
6 Classification and status
International classification (ICS): 23.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1032Test methods for three-phase asynchronous motors
- GB/T 7784Test methods for power reciprocating pump
- GB/T 9069Determination of sound power level for noise emitted by reciprocating pump - Engineering method
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
- JB/T 9090Hydrostatic and leakage tests for positive displacement pump components
Similar standards
Editions of JB/T 9089
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9089-2014 | Pressure Testing Pump | current edition | Current |
| JB/T 9089-1999 | Pressure Testing Pump | previous edition | Superseded |
This page sells the current edition, JB/T 9089-2014. Earlier editions are listed for reference only.
How to Download JB/T 9089-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1032-1985 — Test procedure for three-phase induction motors
GB/T 1032-2005 — Three-phase asynchronous motor test methods
GB/T 1032-2012 — Test procedures for three-phase induction motors
JB/T 9089-2014
$235.00