JB/T 8854.1-2001GCLD crowned gear couplings (English PDF)
GCLD型鼓形齿式联轴器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8854.1-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 3, 2001
Implementation date
December 1, 2001
Scope
JB/T 8854.1-2001 is the English-translated version of GCLD型鼓形齿式联轴器.
JB/T 8854.1-2001 is the Chinese machinery industry standard covering GCLD crowned gear couplings. It was issued on 3 September 2001 and has been in force since 1 December 2001, replacing JB/T 8854.1-1999.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2001 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 8854.1-2001
National Standard of the People's Republic of China
- Replacing
- JB/T 8854.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 8854.1-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 September 2001 and has been in force since 1 December 2001.
It is one of 4 parts of the JB/T 8854 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 8854.1-2001 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 8854.2-1999 — GICL, GIICL type drum gear coupling
JB/T 8854.2-2001 — GIICL and GIICLZ crowned gear couplings
JB/T 8854.3-2001 — GICL and GICLZ crowned gear couplings
Standards on related subjects:
GB/T 5014-2017 — Pin coupling elastomer
GB/T 5015-2017 — Gear coupling with elastomer
JB/T 9050.1-2015 — Cylindrical gear reducers - Part 1: General technical requirements
JB/T 7682-2025 — Serpentine spring safety coupling
JB/T 5512-2025 — Polygonal rubber coupling
JB/T 8853-2015 — Bevel-helical gear reducers
5 Classification and status
Chinese Standard Classification (CCS): J 19
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
Similar standards
Editions of JB/T 8854.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8854.1-2001 | GCLD crowned gear couplings | current edition | Current |
| JB/T 8854.1-1999 | GCLD crowned gear couplings | previous edition | Superseded |
This page sells the current edition, JB/T 8854.1-2001. Earlier editions are listed for reference only.
How to Download JB/T 8854.1-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 8854.1-2001
$249.00