JB/T 12918-2016Pulp diaphragm pump units (English PDF)
矿浆隔膜泵机组
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12918-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 22, 2016
Implementation date
April 1, 2017
Scope
JB/T 12918-2016 is the English-translated version of 矿浆隔膜泵机组.
JB/T 12918-2016 is a recommended standard of the Chinese machinery industry for pulp diaphragm pump units. It states the terms and definitions, the models and basic parameters, the technical requirements, the test methods and the inspection rules, and it also covers marking, painting, packaging, transport and storage.
The units within its scope are slurry diaphragm pumps with a rated flow of not more than 800 m3/h, a rated discharge pressure of not more than 25 MPa and a motor power of not more than 2 500 kW, handling slurries whose solids mass fraction does not exceed 75 % and whose particle size stays within 3 mm, with 90 % of the particles below 1 mm.
Among the standards it quotes are GB/T 755, GB/T 3766, GB 5226.1, GB/T 19671 and JB/T 8854.1. It carries the Chinese classification J71 and ICS 23.080.
Found what you need?
Document preview — JB/T 12918-2016
National Standard of the People's Republic of China
- ICS
- 23.080
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12918-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 October 2016 and has been in force since 1 April 2017.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese machinery industry for pulp diaphragm pump units. It states the terms and definitions, the models and basic parameters, the technical requirements, the test methods and the inspection rules, and it also covers marking, painting, packaging, transport and storage. The units within its scope are slurry diaphragm pumps with a rated flow of not more than 800 m3/h, a rated discharge pressure of not more than 25 MPa and a motor power of not more than 2 500 kW, handling slurries whose solids mass fraction does not exceed 75 % and whose particle size stays within 3 mm, with 90 % of the particles below 1 mm. Among the standards it quotes are GB/T 755, GB/T 3766, GB 5226.1, GB/T 19671 and JB/T 8854.1. It carries the Chinese classification J71 and ICS 23.080.
JB/T 12918-2016 falls under ICS 23.080, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 755
GB/T 786.1
GB/T 2100
GB/T 3766
GB/T 5015
GB 5226.1
GB/T 7784
GB/T 7785
GB/T 10095.1
GB/T 10095.2
GB/T 11352
GB/T 13306
GB/T 13384
GB/T 19671
GB/T 20063.2
JB/T 6396
JB/T 6397
JB/T 6402
JB/T 6908
JB/T 8828
JB/T 8854.1
JB/T 8854
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 13929-2024 — Water ring vacuum pumps and compressors - Testing method
JB/T 13977-2020 — Liquefied natural gas (LNG) cryogenic submerged pumps
GB/T 7782-2020 — Metering pump
JB/T 11172-2025 — Liquid ring compressor
JB/T 11171-2025 — Shielded motor pump for lithium bromide absorption air conditioner
JB/T 11008-2025 — High-speed partial flow pump
6 Classification and status
International classification (ICS): 23.080
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 755Rotating electrical machines - Rating and performance
- GB/T 786.1Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols
- GB/T 2100Corrosion-resistant cast steels for general applications
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 5015Gear coupling with elastomer
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
JB/T 8854
Similar standards
How to Download JB/T 12918-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 12918-2016
$205.00