JB/T 8413.4-2015Internal combustion engines - Oil pumps - Part 4: Steel gears - Technical requirements (English PDF)
内燃机 机油泵 第4部分：钢制齿轮 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 8413.4-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 8413.4-2015 is the English-translated version of 内燃机 机油泵 第4部分：钢制齿轮 技术条件.
JB/T 8413.4-2015 is a recommended Chinese machinery industry standard and is Part 4 of the specification for internal combustion engine oil pumps, covering the steel gears of such pumps.
It sets the technical requirements for these gears, the inspection methods, the inspection rules and the provisions for marking, packaging, transport and storage.
The gears in its scope are the driving and driven external involute gears made of steel for the oil pumps of small and medium-sized internal combustion engines.
Among the standards it quotes are GB/T 230.1, GB/T 3077, GB/T 10095.1 and JB/T 9744. Its Chinese classification code is J95.
Found what you need?
Document preview — JB/T 8413.4-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 9770-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 8413.4-2015 was issued by MIIT on 30 April 2015 and has been in force since 1 October 2015.
It is one of 13 parts of the JB/T 8413 series.
2 Scope
This standard is a recommended Chinese machinery industry standard and is Part 4 of the specification for internal combustion engine oil pumps, covering the steel gears of such pumps. It sets the technical requirements for these gears, the inspection methods, the inspection rules and the provisions for marking, packaging, transport and storage. The gears in its scope are the driving and driven external involute gears made of steel for the oil pumps of small and medium-sized internal combustion engines. Among the standards it quotes are GB/T 230.1, GB/T 3077, GB/T 10095.1 and JB/T 9744. Its Chinese classification code is J95.
3 Normative references
JB/T 8413.4-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 230.1
GB/T 699
GB/T 1800.1
GB/T 2828.1
GB/T 3077
GB/T 10095.1
GB/Z 18620.1
GB/Z 18620.2
JB/T 9744
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 8413-1996 — Lubricating oil pumps - Technical specifications
JB/T 8413.1-2010 — Part 1: Assemblies - Technical requirements
JB/T 8413.2-2010 — Part 2: Assemblies-Methods for test
JB/T 8413.2-2025 — Internal combustion engine - Oil pump - Part 2: Assembly - Test Methods
JB/T 8413.3-2008 — Part 3: Powder metallurgy rotors - Technical requirements
JB/T 8413.5-2008 — Part 5: Powder metallurgy gears - Technical requirements
JB/T 8413.6-2015 — Part 6: Drive shafts - Types and dimensions of shaft ends
JB/T 8413.7-2015 — Part 7: Assemblies - Reliability assessment methods
JB/T 8413.8-2019 — Part 8: Variable displacement oil pumps
JB/T 8413.9-2019 — Part 9: Electronically controlled oil pumps
JB/T 8413.10-2019 — Part 10: Electric oil pumps
JB/T 8413.11-2019 — Part 11: Transmission oil pumps
6 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 230.1Metallic materials - Rockwell hardness test - Part 1: Test method
- GB/T 699Quality carbon structure steels
- GB/T 1800.1Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3077Alloy Structure Steels
- GB/T 10095.1Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
Similar standards
Editions of JB/T 8413.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 8413.4-2015 | Internal combustion engines - Oil pumps - Part 4: Steel gears - Technical requirements | current edition | Current |
| JB/T 9770-1999 | Internal combustion engines - Oil pumps - Part 4: Steel gears - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 8413.4-2015. Earlier editions are listed for reference only.
How to Download JB/T 8413.4-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10095.1-2022 — Cylindrical gears - ISO system of flank tolerance classification - Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
GB/T 1800.1-2020 — Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits
GB/T 230.1-2018 — Metallic materials - Rockwell hardness test - Part 1: Test method
Secure payment via Stripe
Payments accepted
JB/T 8413.4-2015
$129.00