JB/T 9770-1999Internal combustion engines - Oil pump gears - Technical requirements (English PDF)
内燃机 机油泵齿轮 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9770-1999 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 17, 1999
Implementation date
January 1, 2000
Scope
JB/T 9770-1999 is the English-translated version of 内燃机 机油泵齿轮 技术条件.
JB/T 9770-1999 is the Chinese machinery industry standard covering internal combustion engines - Oil pump gears - Technical requirements. It was issued on 17 September 1999 and has been in force since 1 January 2000, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 9770-1999
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 9770-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 September 1999.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
JB/T 9770-1999 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Standards on related subjects:
JB/T 5089.3-2020 — Internal combustion engines - Paper element oil filters - Part 3: Test methods
GB/T 8243.7-2017 — Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test
JB/T 10505-2016 — Internal combustion engines - Oil radiators - Specification
JB/T 8413.3-2025 — Internal combustion engine - oil pump - Part 3: Powder metallurgy rotor - Technical Specifications
JB/T 8413.2-2025 — Internal combustion engine - Oil pump - Part 2: Assembly - Test Methods
JB/T 8413.1-2025 — Internal combustion engine - oil pump - Part 1: Assembly - Technical Specifications
5 Classification and status
Chinese Standard Classification (CCS): J 92
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 9770-1999
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 10062-2026 — Probes used in ultrasonic flaw detection - Testing methods for performance
JB/T 10096-2026 — Cases for power semiconductor devices - Selection guidance
JB/T 10097-2026 — Case for power semiconductor device
JB/T 9770-1999
$169.00