JB/T 7688.10-1995Metallurgical cranes - Technical specifications - Forging cranes (English PDF)
冶金起重机技术条件 锻造起重机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7688.10-1995 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 16, 1995
Implementation date
July 1, 1996
Scope
JB/T 7688.10-1995 is the English-translated version of 冶金起重机技术条件 锻造起重机.
JB/T 7688.10-1995 is the Chinese machinery industry standard covering metallurgical cranes - Technical specifications - Forging cranes. It was issued on 16 June 1995 and has been in force since 1 July 1996, as a first edition.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1995 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 7688.10-1995
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 7688.10-1995 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 June 1995 and has been in force since 1 July 1996.
It is one of 25 parts of the JB/T 7688 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 7688.10-1995 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 7688.1-1995 — General requirements
JB/T 7688.1-2008 — Technical requirements for metallurgical cranes - Part 1: General requirements
JB/T 7688.1-2026 — Technical specifications for metallurgy cranes - Part 1: General requirements
JB/T 7688.2-1995 — Open-hearth furnace charging overhead cranes
JB/T 7688.2-2008 — Technical requirements for metallurgical cranes - Part 2: Charging box cranes
JB/T 7688.3-1995 — Floor charging cranes
JB/T 7688.3-2008 — Technical requirements for metallurgical cranes - Part 3: Forging cranes
JB/T 7688.4-1995 — Charging box cranes
JB/T 7688.4-2013 — Specifications for metallurgical cranes - Part 4: Slab handling cranes
JB/T 7688.5-1995 — Tong cranes
JB/T 7688.5-2012 — Specifications for metallurgical cranes - Part 5: Ladle cranes
JB/T 7688.5-2026 — Technical specifications for metallurgy cranes - Part 5: Ladle cranes
JB/T 7688.6-1995 — Mould preparation cranes
JB/T 7688.6-2008 — Technical requirements for metallurgical cranes - Part 6: Quenching cranes
JB/T 7688.7-1995 — Lid lifting cranes
JB/T 7688.7-2008 — Technical requirements for metallurgical cranes - Part 7: Rake cranes
JB/T 7688.8-1995 — Ingot stripping cranes
JB/T 7688.8-2015 — Technical requirements for metallurgical cranes - Part 8: Soaking pit tong cranes
JB/T 7688.9-1995 — Slab turning cranes
JB/T 7688.11-1995 — Reheating furnace charging and discharging cranes
JB/T 7688.12-1995 — Charging box and magnet cranes
JB/T 7688.13-1995 — Charging box and grab cranes
JB/T 7688.14-1999 — Technical specifications for metallurgical cranes - Slab handling cranes
JB/T 7688.15-1999 — Technical specifications for metallurgical cranes - Ladle cranes
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download JB/T 7688.10-1995
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 7688.11-1995 — Metallurgical cranes - Technical specifications - Reheating furnace charging and discharging cranes
JB/T 7688.9-1995 — Metallurgical cranes - Technical specifications - Slab turning cranes
JB/T 7688.12-1995 — Metallurgical cranes - Technical specifications - Charging box and magnet cranes
JB/T 7688.10-1995
$169.00