JB/T 7028-2018Disc and wheel forgings for steam turbines of 25 MW and below - Technical specification (English PDF)
25MW以下汽轮机轮盘及叶轮锻件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7028-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 9, 2018
Implementation date
October 1, 2018
Scope
JB/T 7028-2018 is the English-translated version of 25MW以下汽轮机轮盘及叶轮锻件 技术条件.
Disk and wheel forgings for steam turbines of 25 MW and below are what JB/T 7028-2018 governs, as a recommended Chinese machinery industry standard.
It prescribes the ordering requirements, the manufacturing process, the technical requirements, the inspection rules and test methods, the acceptance and quality certificates, and the signs and packaging for these forgings.
The materials it has in view are carbon steel and alloy steel. The parts of GB/T 223 quoted by it, among them GB/T 223.11, GB/T 223.17, GB/T 223.26 and GB/T 223.32, are quoted by it it.
It supersedes JB/T 7028-2004. Its classification codes are J32 in the Chinese scheme and 77.140.85 in the international one.
Found what you need?
Document preview — JB/T 7028-2018
National Standard of the People's Republic of China
- ICS
- 77.140.85
- Replacing
- JB/T 7028-2004
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 7028-2018 was issued by MIIT on 9 February 2018 and has been in force since 1 October 2018.
It replaces the earlier edition JB/T 7028-2004, JB/T 7028-1993.
2 Scope
Disk and wheel forgings for steam turbines of 25 MW and below are what JB/T 7028-2018 governs, as a recommended Chinese machinery industry standard. It prescribes the ordering requirements, the manufacturing process, the technical requirements, the inspection rules and test methods, the acceptance and quality certificates, and the signs and packaging for these forgings. The materials it has in view are carbon steel and alloy steel. The parts of GB/T 223 quoted by it, among them GB/T 223.11, GB/T 223.17, GB/T 223.26 and GB/T 223.32, are quoted by it it. It supersedes JB/T 7028-2004. Its classification codes are J32 in the Chinese scheme and 77.140.85 in the international one.
3 Normative references
JB/T 7028-2018 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 223.11
GB/T 223.12
GB/T 223.13
GB/T 223.14
GB/T 223.17
GB/T 223.18
GB/T 223.19
GB/T 223.20
GB/T 223.21
GB/T 223.22
GB/T 223.23
GB/T 223.25
GB/T 223.26
GB/T 223.28
GB/T 223.29
GB/T 223.3
GB/T 223.30
GB/T 223.31
GB/T 223.32
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7028-2004 (earlier edition)
JB/T 7028-1993 (earlier edition)
6 Classification and status
International classification (ICS): 77.140.85
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 223.11Iron, steel and alloy - Determination of chromium content - Titrimetric method and spectrophotometric method
- GB/T 223.12Methods for chemical analysis of iron, steel and alloy. The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
- GB/T 223.13Iron, steel and alloy - Determination of vanadium content - Titrimetric method and spectrophotometric method
- GB/T 223.14Methods for chemical analysis of iron, steel and alloy. The N-benzoyl-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
- GB/T 223.17Methods for chemical analysis of iron, steel and alloy - The diantipyrylmethane photometric method for the determination of titanium content
- GB/T 223.18Methods for chemical analysis of iron, steel and alloy--The sodium thiosulfate separation iodimetric method for the determination of copper content
Similar standards
Editions of JB/T 7028
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7028-2018 | Disc and wheel forgings for steam turbines of 25 MW and below - Technical specification | current edition | Current |
| JB/T 7028-2004 | Disc and wheel forgings for steam turbines of 25 MW and below - Technical specification | previous edition | Superseded |
This page sells the current edition, JB/T 7028-2018. Earlier editions are listed for reference only.
How to Download JB/T 7028-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 223.11-2008 — Iron, steel and alloy -- Determination of chromium content -- Visual titration or potentiometric titration method
GB/T 223.11-2025 — Iron, steel and alloy - Determination of chromium content - Titrimetric method and spectrophotometric method
GB/T 223.12-1991 — Methods for chemical analysis of iron, steel and alloy. The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
Secure payment via Stripe
Payments accepted
JB/T 7028-2018
$135.00