JB/T 7025-2004Technical requirements for rotor and shaft forgings of steam turbines below 25 MW (English PDF)
25MW以下汽轮机转子体和主轴锻件 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7025-2004 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2004
Implementation date
April 1, 2005
Scope
JB/T 7025-2004 is the English-translated version of 25MW以下汽轮机转子体和主轴锻件 技术条件.
JB/T 7025-2004 is the Chinese standard "Technical requirements for rotor and shaft forgings of steam turbines below 25 MW".
Its scope clause reads: This standard specifies the technical requirements, test methods, inspection rules, quality certificate and marking of carbon and low-alloy steel rotor and shaft forgings for steam turbine (25MW or lower).
This standard is applicable to the ordering, manufacturing and acceptance of rotor and shaft forgings for steam turbine (25MW and lower). Its clauses include ordering requirements.
Found what you need?
Document preview — JB/T 7025-2004
National Standard of the People's Republic of China
- Replacing
- JB/T 7025-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword I
- 1 Scope
- 2 Normative References
- 3 Ordering Requirement
- 4 Technical Requirements
- 4.1 Manufacturing Method
- 4.2 Chemical Composition
- 4.3 Mechanical Property
- 4.4 Hardness Uniformity
- 4.5 Non-destructive Inspection
- 4.6 Straightness
- 4.7 Grain Size and Non-metallic Inclusion
- 4.8 FATT50
- 4.9 Thermal Stability Test
- 4.10 High Temperature Endurance Strength
- 5 Test Methods and Inspection Rules
- 5.1 Chemical Analysis
- 5.2 Mechanical Property
- 5.3 Hardness Uniformity Inspection
- 5.4 Magnetic Particle Inspection
- 5.5 Ultrasonic Inspection
- 5.6 Thermal Stability Test
- 5.7 Central Hole Inspection
- 5.8 Grain Size and Non-metallic Inclusion
- 5.9 Residual Stress Inspection
- 5.10 Re-test
- 5.11 Re-heat Treatment
- 6 Acceptance and Quality Certificate
- 7 Marking and Packaging
1 Scope
This standard specifies the technical requirements, test methods, inspection rules, quality certificate and marking of carbon and low-alloy steel rotor and shaft forgings for steam turbine (25MW or lower).
This standard is applicable to the ordering, manufacturing and acceptance of rotor and shaft forgings for steam turbine (25MW and lower).
2 Normative References
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding amending errors in the text), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of the normative document is applicable. For undated references, the latest edition of the normative document applies.
GB/T 222 Method of Sampling Steel for Determination of Chemical Composition and Permissible Variations for Product Analysis
GB/T 223.3~78 Methods for Chemical Analysis of Iron, Steel and Alloy
GB/T 228 Metallic Materials - Tensile Testing at Ambient Temperature (GB/T 228-2002, eqv ISO 6892: 1998(E))
GB/T 229 Metallic Materials - Charpy Notch Impact Test (GB/T 229-1994, eqv ISO 148: 1983)
GB/T 231.1 Metallic Materials - Brinell Hardness Test - Part 1: Test Method (GB/T231.1-2002.eqv ISO 6506-1: 1999(E))
GB/T 2039 Metallic Materials - Creep and Stress-rupture Test in Tension (GB/T 2039-1997, eqv ISO/DIS 204: 1997)
GB/T 6394 Metal-methods for Estimating the Average Grain Size (GB/T 6394-2002, ASTM E112: 1996, MOD)
GB/T 10561 Steel - Determination of Content of Non-metallic Inclusion - Micrographic Method Using Standard Diagrams (GB/T 10561-1999, eqv ISO 4967: 1979)
JB/T 1581 Ultrasonic Flaw Detection of Rotor and Main Shaft of the Turbine and Turbogenerator
JB/T 8468 Magnetic Particle Examination Method for Steel Forgings
JB/T 8888 Test Method for Measuring Residual Stresses by the Ring-core Method in Rotor Forgings for Turbine and Generator
JB/T 9021 Test Method for Test Stability of Steam Turbine Shafts and Rotor Forgings
3 Ordering Requirements
3.1
The adopted standard, material designation, strength grade, requirements jointly determined by the purchaser and the supplier in provisions of this standard, technical requirements and inspection items beyond requirements of this standard shall be indicated in the order contract or order agreement by the purchaser.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of JB/T 7025
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7025-2004 | Technical requirements for rotor and shaft forgings of steam turbines below 25 MW | current edition | Current |
| JB/T 7025-1993 | Technical requirements for rotor and shaft forgings of steam turbines below 25 MW | previous edition | Superseded |
This page sells the current edition, JB/T 7025-2004. Earlier editions are listed for reference only.
How to Download JB/T 7025-2004
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 106-2024 — Valves marking and coating
JB/T 14540-2024 — Sanitary cam rotor pumps
JB/T 14754-2024 — Equipment for disposal of dead and diseased livestock and poultry
Secure payment via Stripe
Payments accepted
JB/T 7025-2004
$90.00