JB/T 6259-2008Self-locking electrical connectors (English PDF)
自锁紧电连接器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6259-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 6259-2008 is the English-translated version of 自锁紧电连接器.
JB/T 6259-2008 is a recommended Chinese machinery industry standard on self-locking electrical connectors. It gives their classification, the technical requirements, the test methods and the inspection rules, and it also covers marking, packaging, transport and storage.
The connectors it governs are the self-locking ones fitted in instruments and meters and in electronic, electrical and power equipment of various kinds. The standard carries the Chinese classifications L23 and J24 and the international classification 29.120.30.
Among the standards it quotes are GB/T 2421-1999, GB/T 2423.1-2001 and GB/T 5095.2-1997.
Found what you need?
Document preview — JB/T 6259-2008
National Standard of the People's Republic of China
- ICS
- 29.120.30
- Replacing
- JB/T 6259-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 6259-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 6259-1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on self-locking electrical connectors. It gives their classification, the technical requirements, the test methods and the inspection rules, and it also covers marking, packaging, transport and storage. The connectors it governs are the self-locking ones fitted in instruments and meters and in electronic, electrical and power equipment of various kinds. The standard carries the Chinese classifications L23 and J24 and the international classification 29.120.30. Among the standards it quotes are GB/T 2421-1999, GB/T 2423.1-2001 and GB/T 5095.2-1997.
JB/T 6259-2008 falls under ICS 29.120.30, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2421-1999 — Environmental testing for electric and electronic products Part 1: General and guidance
GB/T 2423.1-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.5-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 5095.2-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 5095.3-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests
GB/T 5095.4-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 4: Dynamic stress tests
GB/T 5095.6-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests
GB/T 5095.8-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations
4 Where this standard sits
It cites 11 standards, among them GB/T 2421-1999, GB/T 2423.1-2001, GB/T 2423.2-2001, listed in full above.
One other standard in this catalogue cites it: JB/T 5449-2008.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other editions:
JB/T 6259-1992 (earlier edition)
Standards on related subjects:
GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
7 Classification and status
International classification (ICS): 29.120.30
Chinese Standard Classification (CCS): L 24
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2421-1999Environmental testing - General and guidance
- GB/T 2423.1-2001Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2001Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.5-1995Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829-2002Sampling procedures and tables for periodic inspection by attributes
Cited by
Similar standards
Editions of JB/T 6259
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6259-2008 | Self-locking electrical connectors | current edition | Current |
| JB/T 6259-1992 | Self-locking electrical connectors | previous edition | Superseded |
This page sells the current edition, JB/T 6259-2008. Earlier editions are listed for reference only.
How to Download JB/T 6259-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2421-1999 — Environmental testing for electric and electronic products Part 1: General and guidance
GB/T 2423.1-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
JB/T 6259-2008
$225.00