JB/T 5816-2008Drawing machines for wires and cables - Technical requirements (English PDF)
电线电缆拉线设备 技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5816-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 1, 2008
Implementation date
July 1, 2008
Scope
JB/T 5816-2008 is the English-translated version of 电线电缆拉线设备 技术要求.
JB/T 5816-2008 is a recommended Chinese machinery industry standard setting the technical requirements for the drawing equipment used on wire and cable conductors, taking in the various types of that equipment.
The requirements are written for the design, the manufacture, the inspection and the identification of conductor drawing machines, and the equipment named in the title, the drawing machines for wires and cables.
The standard supersedes the 1991 edition, JB/T 5816-1991. It is classified K13 in the Chinese system and 29.060.01 in the international one.
Found what you need?
Document preview — JB/T 5816-2008
National Standard of the People's Republic of China
- ICS
- 29.060.01
- Replacing
- JB/T 5816-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5816-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.
It replaces the earlier edition JB/T 5816-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting the technical requirements for the drawing equipment used on wire and cable conductors, taking in the various types of that equipment. The requirements are written for the design, the manufacture, the inspection and the identification of conductor drawing machines, and the equipment named in the title, the drawing machines for wires and cables. The standard supersedes the 1991 edition, JB/T 5816-1991. It is classified K13 in the Chinese system and 29.060.01 in the international one.
JB/T 5816-2008 falls under ICS 29.060.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 131
GB/T 2900.40
GB/T 4457.2
GB/T 4457.4
GB/T 4457.5
GB/T 4458.1
GB/T 4458.2
GB/T 4458.3
GB/T 4458.4
GB/T 4458.5
GB/T 4458.6
GB/T 4459.1
GB/T 4459.2
GB/T 4459.3
GB/T 4459.4
GB/T 4459.5
GB/T 4459.6
GB/T 4459.7
GB/T 4460
GB/T 4728.1
GB/T 4728.2
GB/T 4728.3
GB/T 4728.4
GB/T 4728.5
GB/T 4728.6
GB/T 4728.7
GB/T 4728.8
GB/T 4728.9
GB/T 4728.10
GB/T 4728.11
GB/T 4728.12
GB/T 4728.13
GB/T 5868
GB/T 10089
GB/T 10095.1
GB/T 10095.2
GB/T 11365
GB/T 13384
GB/T 15753
JB/T 5814.2
JB/T 5815
JB/T 7601
JB/T 8997
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5816-1991 (earlier edition)
Standards on related subjects:
JB/T 4278.10-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 10: Spark tester
GB/T 5013.4-2008 — Rubber insulated cables of rated voltages up to and including 450/750V -- Part 4: Cords and flexible cables
GB/T 5023.3-2008 — Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 3: Non-sheathed cables for fixed wiring
JB/T 5814.1-2008 — Special equipment for electric wires and cables - Basic parameters - Part 1: General
JB/T 5813-2008 — Enamelling machines for winding wires - Technical requirements
JB/T 5812-2008 — Enamelling machines for winding wires - Types and dimensions
6 Classification and status
International classification (ICS): 29.060.01
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 131Geometrical Product Specifications (GPS) -- Indication of Surface texture in technical Product documentation
- GB/T 2900.40Electrotechnical terminology--Machineryand equipment for electric wires and cables
- GB/T 4457.2Technical drawing - Drawing presentation - General principles of leader lines and reference lines
- GB/T 4457.4Mechanical drawings -- General principles of presentation -- Lines
- GB/T 4457.5Mechanical drawings—Basic conventions for representing areas on cuts and sections
- GB/T 4458.1Mechanical drawings -- General principles of presentation -- Views
JB/T 7601 · JB/T 8997
Similar standards
Editions of JB/T 5816
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5816-2008 | Drawing machines for wires and cables - Technical requirements | current edition | Current |
| JB/T 5816-1991 | Drawing machines for wires and cables - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 5816-2008. Earlier editions are listed for reference only.
How to Download JB/T 5816-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10089-1988 — Accuracy of cylindrical worm and wormwheel
GB/T 10089-2018 — Accuracy of cylindrical worm and wormwheel
GB/T 10095.1-2001 — Cylindrical gears - System of accuracy - Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
JB/T 5816-2008
$165.00