Valid

JB/T 5725-1991Woodworking knife grinding machines - Structural safety (English PDF)

木工磨刀机 结构安全

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5725-1991 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 4, 1991

Implementation date

July 1, 1992

Scope

JB/T 5725-1991 is the English-translated version of 木工磨刀机 结构安全.

JB/T 5725-1991 is a recommended standard of the Chinese machinery industry sector covering woodworking knife grinding machines. It fixes the structural safety requirements for this grinding equipment, taking in the general requirements, the requirements placed on guards and other protective devices, and the requirements for the operating mechanism.

Its field of application is the grinding machines used to sharpen woodworking cutters. It sits under the Chinese classification J65 for woodworking machinery, and it cites GB 2494, GB 2894, GB 9239, GB 10961, GB 12557 and JB 5720. Issued on 4 October 1991, it has applied since 1 July 1992.

Found what you need?

Document preview — JB/T 5725-1991

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 5725-1991 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 October 1991 and has been in force since 1 July 1992.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry sector covering woodworking knife grinding machines. It fixes the structural safety requirements for this grinding equipment, taking in the general requirements, the requirements placed on guards and other protective devices, and the requirements for the operating mechanism. Its field of application is the grinding machines used to sharpen woodworking cutters. It sits under the Chinese classification J65 for woodworking machinery, and it cites GB 2494, GB 2894, GB 9239, GB 10961, GB 12557 and JB 5720.

JB/T 5725-1991 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB 2494

GB 2894

GB 9239

GB 10961

GB 12557

JB 5720

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 5725-1991

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5725-1991

$109.00