JB/T 6108-1992General woodworking band saws - Structural safety (English PDF)
普通木工带锯机 结构安全
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6108-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 16, 1992
Implementation date
January 1, 1993
Scope
JB/T 6108-1992 is the English-translated version of 普通木工带锯机 结构安全.
JB/T 6108-1992 is the Chinese machinery industry standard on the structural safety of general purpose woodworking band saws.
It sets out general requirements together with requirements for the safety guards, the steering or tracking mechanism and the device that tensions and holds the saw blade, and it adds provisions on chip extraction and on noise and vibration.
Band saws of the general purpose type are what it applies to. Its classification entry in the Chinese system is J65, the woodworking machinery group. It quotes GB 699, GB 9239, GB 11357 and GB 12557. Issued on 16 May 1992, it has applied since 1 January 1993.
Found what you need?
Document preview — JB/T 6108-1992
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 6108-1992 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 May 1992.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese machinery industry standard on the structural safety of general purpose woodworking band saws. It sets out general requirements together with requirements for the safety guards, the steering or tracking mechanism and the device that tensions and holds the saw blade, and it adds provisions on chip extraction and on noise and vibration. Band saws of the general purpose type are what it applies to. Its classification entry in the Chinese system is J65, the woodworking machinery group. It quotes GB 699, GB 9239, GB 11357 and GB 12557.
JB/T 6108-1992 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,316 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 Normative references
GB 699
GB 9239
GB 11357
GB 12557
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
GB 699 · GB 9239 · GB 11357
Similar standards
How to Download JB/T 6108-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
JB/T 6108-1992
$189.00